A collection of forty Wind tunnel aerodynamic shapes that were used in the developement of Concorde and Aerobus and comprises Bodies , Wedges , Narrow Delta shapes and potential hypersonic airliner shapes.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood with a metal edge.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Potential hypersonic airliner shape, made of wood. Two pieces of wood screwed to another piece of wood, four screws per piece. Forming an open book shape.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood. White with two screw holes in the top and a section cut out the back.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood. White with two screw holes in the top and a section cut out the back.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood. White with two screw holes in the top and a section cut out the back.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wedge shape, made of wood. Made of 14 bits of wood attached together, with the pattern mirroring in the centre. Four screw holes on one end and six on the other.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wedge shape, made of wood. Made of 14 bits of wood attached together, with the pattern mirroring in the centre. Four screw holes on one end and six on the other. Letter A written on the bottom in red pen.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Painted white with a number of holes in the top.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wedge shape, made of wood. Made of 12 bits of wood attached together, with the pattern mirroring in the centre. Two screw holes on one end and four on the other
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wedge shape, made of wood. Made of 10 bits of wood attached together, with the pattern mirroring in the centre. Two screw holes on one end and four on the other.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Potential hypersonic airliner shape, made of wood. Some filled holes and two screw holes on the top. Red/ pink edges with a yellow nose section.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Two holes in the top.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wedge shape with two rectangular sections in the top, each with two holes.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Triangular in shape, with a metal bar attached to the rear, screwed onto the triangle with two screws.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Triangular in shape, with a metal bar attached to the rear, this has a bevelled edge and a number of lines drawn on the front.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood. One rounded end one pointed, a detachable top section with a number of screw holes.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wedge shape, with a bar with two screw holes out the back.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood. Painted white, with two screw holes in the top. Along with a wedge section removed from the back and a slit cut out the top.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Tear drop shaped with a small stick out the back, made of wood.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood, a screw and nut on the top cut away section.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Potential hypersonic airliner shape, made of wood. Large hole at one end, possibly hollow with two screw holes on the top.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Cone shaped, probably separable, made of wood.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Wooden, painted white with a number of chips and screw holes. Not painted at one end, some of this is varnished some not.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Body shape, made of wood. Painted white with a separable top section. A number of screw holes and a section cut out on the top.
Frame for wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Made of wood. Comprising of a central middle section with two cross beams, various screw holes. Some padding on one side.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Two rectangular sections cut out the top, two circular sections filled in and a screw protruding.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Four square holes cut in the top and 3 large and one small circular holes cut in the top.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Mounted on a board with wooden sections. Three circular and two rectangular holes in the top.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Three are circular holes in the top and four square ones. The two longer edges have some black tape residue.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Mounted on a wooden frame. A number of small holes drilled along the middle and two larger screws.
Wind tunnel aerodynamic shape, used in the development of Concorde and Aerobus. Narrow Delta shape, made of wood. Three holes near the top and two larger ones near the middle.
