Certificate of apprenticeship of John Stansfield
Certificate of apprenticeship of John Stansfield 1904;; issued by Bradford Technical college.
- Object Number:
- 1978-234/1
- type:
- certificates
Stansfield collection of toolmaker's tools and Apprenticeship Papers and union card
Certificate of apprenticeship of John Stansfield 1904;; issued by Bradford Technical college.
Certificate of Apprenticeship (Indentures) between Trevor Stansfield and Evershed and Vignoles Ltd. 1938 -1943.
Certificate of Membership of the Amalgamated Toolmaker's Union dated 1916.
Toolmaker's oak tool cabinet.
1 3/4" 'V' block with two clamps.
2 1/2" 'V' universal block with buried clamp.
3" high precision angle plate with 'V 'clamp.
A 6" high precision 'knife edge' master square.
A 5" high precision sine bar
A pair of 3" high tensile toolmakers 'clamps.
A pair of 2" high tensile toolmakers 'clamps.
A pair of 3/4" high tensile toolmakers 'clamps.
A pair of 1/2" high tensile toolmakers 'clamps.
A machine setting 'wobler' device.
A centre punch with 'spacing' device.
A variable position setting needle.
An internal rule holder with a 1/2" rule.
Two key seat rule clamps.
A minature tap wrench.
A 45 degree and a 60 degree toolmaker's precision set square.
A 1 " x 1" flat steel square.
A 2 1/2" 'draft angle' square with a spare 3/16" blade for use with small apertures.
Two small B. A. box spanners.
Eight pairs of assosted sizes of precision parallel bars
Lathe tool post 'setting up device'with spring urged universal jointed error amplifying indicator bar.
A 5 1/2" 'knife edge and a 1 3/4" knife edge straight edge, both ground from files.
A tap wrench for B. A. dies fitted with a 7 B. A. die and 13 other dies in a plain box.
A grinding wheel crushing tool with various sized rollers, one in the device, nine in a rectangular lidded storage tin.
Two holders for a starrett dial gauge being a screw clamp with its dial bar and a square bar for use in a lathe tool post but without its own dial bar.
A pair of scribing beam trammels.
One scribing block and a clock holder pillar and a second pillar.
One circular bench block.
Three bench charts of stamped aluminium indicating sizes for B. A. threads, letter drillsand number drills.
A 3" reversible lathe carrier wrench and a 1" reversible lathe carrier wrench.
1" range depth gauge.
A pair of 1 5/8" x 3/4" laminated blocks and a pair of 1 5/8" x 1 3/8" laminated blocks both for use with magnetic chucks.
22 various needle files in a brass container; the container made from two sea mine horns.
A set of number drills in a steel collapsable drill holder. Almost a complete set except for numbers 43, 50, 54, 57 and 60.
A pair of 1 1/2" x 3 1/2" bench parallels in a wooden box.
A starrett micrometer range 0" to 1" made by the L. S. Starrett Co., and stamped No 230.
A starrett depth micrometer range 0" to 1" made by the L. S. Starrett Co., with interchangeable 2" and 3" rods
A Brown and Sharpe micrometer range 0" to 1" with a setting ring.,
A Kielpart micrometer range50 mm to 75mm with a setting bar.
Four Starrett toolmakers' locating buttons on a stand in a cardboard box, stamped No 494A.
A diemakers' square with metric markings and stamped No 453E with an auxilliary blade, all in a box.
A Starrett indicator clock (the indicator hand is loose), with 4 interchangeable fingers, the fifth one being fitted to the indicator.
A Verdict indicator clock in a box but lacking holder for which the box has a pocket.
An eye glass by L.S.Starrett Company, and Moore & Wright
A set of radius curves on a ring made by Moore and Wright.
Whitworth thread gauges on a ring
Fold a way 'System International' thread gauges made by Starrett.
3" Internal calipers by Moore and Wright.
3" external calipers by Moore and Wright.
Pair of 3"dividers by Moore and Wright.
Pair of 6" internal cilipers by Starrett.
Box of six small grinding bobs.
A circular and a small square lapping block and a rod reduced at it's end and cranked for working the lapsing blocks.
Oddities from the toolmaker's box; three small triangular setting shims;a 0.500" slip gauge by Matrix;a 6" steel rule deliberately shortened by cutting off the first 1";a finger probe for a measuring instrument or dial gauge being a 2 5/8" long rod with a collet holding a 7/8" finger;a pressed steel ring with a resilient washer or bush inside; a square key.
A box containing 8 double ended centre drills, 1 straight flute drill, five cutters and 4 slot milling cutters.
A drawer from the cabinet containing cutters and cutting stock consisting of :- 27 plain cutters, 6 countersinking or similar cutters; 1 piece of square stellite steel; 18 pieces of ground stock.