Ammunition pouch and webbing weaving loom

Ammunition pouch and webbing weaving loom

Details

Category:
Textiles Machinery
Object Number:
1993-614
type:
weaving loom

Parts

Webbing weaving loom

Webbing weaving loom

Webbing weaving loom

Measurements:
overall: 1800 mm x 1680 mm x 2780 mm,
Object Number:
1993-614/1
type:
loom
Two wire mesh guards

Two wire mesh guards

Two wire mesh guards, smaller for guarding bevel drive front lower left side, larger for main motor belt drive

Object Number:
1993-614/2
type:
guards
10 warp reels

10 warp reels

10 Warp reels. These mounted on part /5 at front lower end. 4 of these filled with warp

Object Number:
1993-614/3
type:
warp reel
3 warp reels (direct drive type)

3 warp reels (direct drive type)

3 warp reels (direct drive type), one is broken. These for mounting front end mid height. 1 warp reel for mounting at high level

Object Number:
1993-614/4
type:
warp reel
3 cages for holding item 3 on the loom

3 cages for holding item 3 on the loom

3 cages for holding item 3 on the loom, two of these with spindle. The cages would bolt to bottom front of loom

Object Number:
1993-614/5
type:
cage
Cast-brackets

Cast-brackets

4 cast-brackets to be bolted at high level front to support reels. 2 short cast brackets

Object Number:
1993-614/6
type:
bracket
Collection of spindles

Collection of spindles

5 spindles 420mm long; 4 spindles 390mm long; 2 spindles 28mm long; 1 stub and nut

Object Number:
1993-614/7
type:
spindle
Two C.I. supports and part of one that is broken

Two C.I. supports and part of one that is broken

Two C.I. supports and part of one that is broken. One cast iron bracket and stud & nut. Large washer, two dry bearings and two pattern chain washers. 2 bracket fixing bolts

Materials:
iron (cast)
Object Number:
1993-614/8
type:
support and bracket
Revolution counter with two digital counter scales

Revolution counter with two digital counter scales

One revolution counter with two digital counter scales. For positioning on revolution counter drive fixed to horizontal drive shaft on the loom

Object Number:
1993-614/9
type:
scales - weighing device
16 weights

16 weights

16 weights, 5 weight holding rods; 1 cranked weight holding rod; 1 oil can

Object Number:
1993-614/10
type:
weights
Two shuttle holders

Two shuttle holders

2 shuttle holders complete. 2 incomplete shuttle holders are also attached to the loom

Object Number:
1993-614/11
type:
shuttle holders