Lathe Bed
- Object Number:
- 1937-121/1
- type:
- lathe bed
Screw cutting lathe made by Joseph Clement
Screw cutting lathe made by Joseph Clement, with small glazed case containing specimens of work done.
Parts
Lead Screw
- Object Number:
- 1937-121/2
- type:
- screw
A pair of wooden drawer cabinets for tool storage
- Object Number:
- 1937-121/3
- type:
- cabinets
Tool Board
- Object Number:
- 1937-121/4
- type:
- tool board
3 standards to support bed
- Object Number:
- 1937-121/5
- type:
- standards
3 standards to support overhead gear.
Double-geared headstock with additional countershaft
- Materials:
- one bolt and keeper missing and dust plugs missing
- Object Number:
- 1937-121/7
- type:
- headstock
Double-geared headstock
Division plate to fit rear of mandrel of /8
- Object Number:
- 1937-121/9
- type:
- division plate
Heavy faceplate with gear-ring
- Object Number:
- 1937-121/10
- type:
- faceplate
Screw-in centre to fit nose of part 1937-121/8
- Object Number:
- 1937-121/11
- type:
- screw-in centre
Clement's driver complete with centre and 2 short driving pins
- Object Number:
- 1937-121/12
- type:
- driver
Bell chuck with 4 screws
- Object Number:
- 1937-121/13
- type:
- chuck
Face chuck with 2 independent jaws
- Object Number:
- 1937-121/14
- type:
- chuck
Face chuck with 2 jaws
- Object Number:
- 1937-121/15
- type:
- chuck
Pair of biters for 1937-121/14 and/or 1937-121/15
- Object Number:
- 1937-121/16
- type:
- biters
Faceplate to fit nose of 1937-121/7
- Object Number:
- 1937-121/17
- type:
- faceplate
Angle-plate to fit 1937-121/17 with 2 bolts
- Object Number:
- 1937-121/18
- type:
- lathe
Bracket bearing for leadscrew with wheelplate
- Object Number:
- 1937-121/19
- type:
- bracket
Three studs for wheelplate 1937-121/19
- Object Number:
- 1937-121/20
- type:
- stud
23 change wheels for screwcutting and sliding
- Object Number:
- 1937-121/21
- type:
- wheel
Tailstock with winch for urging screw
- Object Number:
- 1937-121/22
- type:
- tailstock
Tailstock with winch for urging screw
- Object Number:
- 1937-121/23
- type:
- tailstock
Fixed steady
- Object Number:
- 1937-121/24
- type:
- steady
Adjustable travelling steady
- Object Number:
- 1937-121/25
- type:
- steady
Heavy geared cutting frame for use on the slide rest
- Object Number:
- 1937-121/26
- type:
- frame
Heavy geared cutting frame for use on the slide rest
- Object Number:
- 1937-121/27
- type:
- frame
Small geared cutting frame for use on the slide rest
- Object Number:
- 1937-121/28
- type:
- cutting frame
Mechanism to give a reciprocating motion
- Object Number:
- 1937-121/29
- type:
- mechanism
Crude jointed lever
- Object Number:
- 1937-121/30
- type:
- lever
Sliding saddle
- Object Number:
- 1937-121/31
- type:
- saddle
2-motion slide rest for use on 1937-121/31
- Object Number:
- 1937-121/32
- type:
- slide rest
Plain slide rest
- Object Number:
- 1937-121/33
- type:
- slide rest
"Cradle" fitting to secure 1937-121/33 to bed
- Object Number:
- 1937-121/34
- type:
- fitting
Hand-rest pedastal and tee
- Object Number:
- 1937-121/35
- type:
- hand rest
Wheelplates
- Object Number:
- 1937-121/36
- type:
- wheel
Two small single pulleys
- Object Number:
- 1937-121/37
- type:
- pulleys
Two guide pulleys on bracket
- Object Number:
- 1937-121/38
- type:
- pulleys
Single-geared headstock with holding-down bolt and keeper
- Object Number:
- 1937-121/39
- type:
- headstock
Endless-screw frame to fit headstock 1937-121/8
- Object Number:
- 1937-121/40
- type:
- frame
70 bronze change-wheels of 20 d.p. for use on wheelplate 1937-121/40
- Object Number:
- 1937-121/41
- type:
- wheel
Wooden chest to contain change-wheels
- Object Number:
- 1937-121/42
- type:
- wheel
Two bronze handwheels with pulley groove and hand winch
- Object Number:
- 1937-121/43
- type:
- wheel
Bronze hand-wheel with pulley groove and hand winch
- Object Number:
- 1937-121/44
- type:
- wheel
Bronze hand wheel similar in style to 1937-121/43 and 1937-121/44
- Object Number:
- 1937-121/45
- type:
- wheel
Bronze wheel with pulley groove and two stop or carrying pins
- Object Number:
- 1937-121/46
- type:
- wheel
Two steel winches to fit lower parts of slide rests
Bronze clutch lever for overhead gear
Bronze ring
- Object Number:
- 1937-121/49
- type:
- ring
Bronze fitting on wooden block
Steel hob for cutting teeth of gear ring
23 milling cutters for wheel teeth
- Object Number:
- 1937-121/52
- type:
- cutter
Bronze worm wheel of unknown purpose
- Object Number:
- 1937-121/53
- type:
- wheel
Two heavy tommy bars
- Object Number:
- 1937-121/54
- type:
- bar
13 machine chasers (double-ended)
- Object Number:
- 1937-121/55
- type:
- chaser
4 steel biters (numbered 1-4) for an (unidentified) chuck
Steel ratchet wheel with arm and gathering pawl
- Object Number:
- 1937-121/57
- type:
- wheel
An iron crown pulley
- Object Number:
- 1937-121/58
- type:
- pulley
2 crankshafts (marked A and B to correspond to foot wheels). Pts 1
- Object Number:
- 1937-121/59
- type:
- crankshafts
Two footwheels marked A and B to correspond with cranks
- Object Number:
- 1937-121/60
- type:
- wheel
Pulley from 1937-121/59 pt 1
- Object Number:
- 1937-121/61
- type:
- pulleys
Two over-head shafts
- Object Number:
- 1937-121/62
- type:
- shaft
Two bronze pulleys for over head shafts
- Object Number:
- 1937-121/63
- type:
- pulleys
Pulley and dog clutch (2 pieces).
- Object Number:
- 1937-121/64
- type:
- pulleys
Two treadles with footboards
- Object Number:
- 1937-121/65
- type:
- footboard
Four pitmans
- Object Number:
- 1937-121/66
- type:
- pitman
Two square bars for over head gear
- Object Number:
- 1937-121/67
- type:
- bar
Index lever
- Object Number:
- 1937-121/68
- type:
- index lever
Pulley and dog clutch
- Object Number:
- 1937-121/69
- type:
- pulleys
Right-hand bearing for lead screw
- Object Number:
- 1937-121/70
- type:
- bearing
Two Iron Floor Straps
- Object Number:
- 1937-121/71
- type:
- strap
Clasp nut assembly with 3 screws
- Object Number:
- 1937-121/72
- type:
- clasp nut
