Zeiss Toolroom bench microscope with accessories, made in 1944 and used for war reparation.
Toolroom microscope made by Zeiss; 1944.
Detachable lamp unit with 100 watt 12 v. bulb magnifying lens and spirit filled level with badly deteriorated electrical lead for use with the Zeiss toolroom microc.
Detachable lamp unit 230 volts - 24 watts with magnifier lens and lead for use with the Zeiss tool room microscope.
Demountable diffuser unit / ground glass viewer for use with the Zeiss tool room microscope
36 watt lamp unit and Magnifier for toolroom microscope..
Green filter lens in holder for use with the Zeiss toolroom microscope.
70 mm diam. convex lens in metal holder (may not belong).
A pair of 'V' blocks by Zeiss for mounting the component.
A boxed set of standard accessories for use with the workshop microscope, housed in a wooden box. The set is almost complete but lacks gauge blocks.
A wooden fitted box for toolroom microscope accessories.
An examination table or measuring cradle with centres for screwing to the workshop microscope base.
A sample clamp, additional part to /2 to replace one of the centres.
A pair of 'V' clamps to clamp to the edge of circular glass table of the toolroom microscope.
An ocular protractor eyepiece for the measurement of angles with a seperate scale reading eyepiece; for use with the toolroom microscope.
An ocular prism to fit the periferal angle measuring eyepiece of Pt5.
An ocular eyepiece with screw thread form graticules of metric and Whitworth threads giving 30 X magnification.
An objective lens unit giving 1 X magnification for use with the toolroom microscope.
An objective lens unit giving 3 X magnification for use with the toolroom microscope and retained in the head of the toolroom microscope..
A diffuser objective lens believed to be for exchange with lens and insertion into barrel of part 8 or part 9 of the toolroom microscope.
Lamp unit for use with the toolroom microscope.
A clamp for holding end gauge blocks for use with the toolroom microscope.
A 'einstell lehre', an adjuster for ensuring the table is perpendicular to the optical axis of the toolroom microscope.
Two small dimpled centres for fitting to /9 part 2 of the toolroom microscope.
A detachable examination bench or centres cradle screwed to the Zeiss toolroom microscope base.
Parts accessories or items used with the toolroom microscope but that may not belong to a standard set. These consist of a 75 mm gauge block, a circular disc examination table, a 25 mm diam brass disc, a locking ring of 30 mm diameter, a castelated locking ring of 30 mm diameter, two small clamping plates four cheese headed slotted bolts and two smaller chese head slotted bolts.
Parts accessories or items used with the toolroom microscope but that may not belong to a standard set. These consist of a 75 mm gauge block, a circular disc examination table, a 25 mm diam brass disc, a locking ring of 30 mm diameter, a castelated locking ring of 30 mm diameter, two small clamping plates four cheese headed slotted bolts and two smaller chese head slotted bolts.
Parts accessories or items used with the toolroom microscope but that may not belong to a standard set. These consist of a 75 mm gauge block, a circular disc examination table, a 25 mm diam brass disc, a locking ring of 30 mm diameter, a castelated locking ring of 30 mm diameter, two small clamping plates four cheese headed slotted bolts and two smaller chese head slotted bolts.
Parts accessories or items used with the toolroom microscope but that may not belong to a standard set. These consist of a 75 mm gauge block, a circular disc examination table, a 25 mm diam brass disc, a locking ring of 30 mm diameter, a castelated locking ring of 30 mm diameter, two small clamping plates four cheese headed slotted bolts and two smaller chese head slotted bolts.
A depleted box of accessories for a smaller Zeiss Toolroom microscope but containing three eyepieces that are suitable for and fit this larger machine. All parts fit 1982-916 but were not acquired with it.
A goniometer eyepiece depicting whitworth and metric thread forms with a protractor scale that fits this toolroom microscope and also the smaller one, Inv. No 1982-916
A goniometer eyepiece depicting concentric circular scales with a protractor scale; it fits this toolroom microscope and also the smaller one, Inv. No 1982-916
A goniometer eyepiece depicting large concentric circular arc scales and giving a magnification of 10 times; it fits this toolroom microscope and also the smaller one, Inv. No 1982-916
Parts supplied with this toolroom microscope but are only suitable for use with the smaller toolroom microscope Inv. No 1982-916. These being an optical prism, a pair of adjustable V blocks, a slotted grooved clamping bar, a diffusing lens and a steel bar supported on three inset balls.
