Interferometer for the testing and correction of prisms. Includes wooden stand, cast base, collimator, telescope, three mirror assemblies, camera and steel cover. Condition good. Made by Hilger & Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Wooden stand for interferometer with four steel plates and three bolts in each plate attached at each corner of the base. Height 1000mm; base 690x690mm; top 450x450mm. Made by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Cast steel workbase of Hilger and Watts Ltd interferometer for mounting the accessories. Made by Hilger & Watts, 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959. Serial no.N90301 51203.
Sheet steel light exclusion cover for Hilger & Watts Ltd interferometer, with three hinged flaps which enable access to the accessories, made by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Special purpose camera for Hilger & Watts Ltd interferometer with mounting bracket and two guide rods which locate the camera to the telescope support brackets, by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Collinator for Hilger & Watts Ltd interferometer with two attached mounting brackets and one lamp holder screwed to a support rod, made by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Telescope for Hilger & Watts Ltd interferometer with two attached mounting brackets, by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Right anglecast steel support and glass mirror, part of Hilger & Watts Ltd interferometer, with adjustment screws for mirror positioning. Plus purpose made wooden protection cover. Made by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Right angle cast steel support for square section glass block mirror, part of Hilger & Watts Ltd interferometer, with adjustment screws for mirror positioning. Plus attached rope for adjusting overall position of assembly with purpose made wooden protection cover. Made by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Right angle cast steel support for square section glass block mirror, part of Hilger & Watts Ltd interferometer, with adjustment screws for mirror positioning. Plus purpose made wooden protection cover. Made by Hilger and Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
Wooden stand for Interferometer for the testing and correction of prisms. Includes wooden stand, cast base, collimator, telescope, three mirror assemblies, camera and steel cover. Condition good. Made by Hilger & Watts Ltd., 98 St. Pancras Way, Camden Road, London, NW1, England, 1950-1959.
