Models of the ICI 'Pruteen' plant at Billingham and model of the site

Engineering Models of the ICI Pruteen Plant components for manufacturing single cell protein, and architectural/ builder's model of the complete ICI Pruteen Plant at Billingham, Stockton on Tees, England, 1978-1983

Engineering Model of the Pruteen Plant for manufacturing single cell protein, c. 1980

Details

Category:
Biotechnology
Object Number:
1990-97
type:
model - representations, pruteen, manufacturing plants and proteins
credit:
ICI Biological Products

Parts

Model of Pruteen Plant Effluent Treatment Area

Model of Pruteen Plant Effluent Treatment Area

Model of Pruteen Plant Effluent treatment area, one of two parts. Labelled "A - Effluent treatment area 1 of 2"

Measurements:
overall: 740 mm x 1000 mm x 1450 mm, 46.5 kg
Object Number:
1990-97 Pt1
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Effluent Treatment Area

Model of Pruteen Plant Effluent Treatment Area

Model of Pruteen Plant Effluent treatment area, one of two parts. Labelled "A - Effluent treatment area, 2 of 2"

Measurements:
overall: 750 mm x 1670 mm x 1200 mm, 84.5 kg
Object Number:
1990-97 Pt2
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Compression and Vaporisation Area

Model of Pruteen Plant Compression and Vaporisation Area

Model of Pruteen Plant Compression and vapourisation area, one of two parts. Labelled "B - Compression and vapourisation area 1 of 2"

Measurements:
overall: 830 mm x 1650 mm x 960 mm, 64 kg
Object Number:
1990-97 Pt3
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Compression and Vaporisation Area

Model of Pruteen Plant Compression and Vaporisation Area

Model of Pruteen Plant Compression and vapourisation area, one of two parts. Labelled "B - Compression and vapourisation area, 2 of 2"

Object Number:
1990-97 Pt4
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Raw Materials Store and Tank Compound

Model of Pruteen Plant Raw Materials Store and Tank Compound

Model of Pruteen Plant Raw materials store and tank compound. Labelled "C - Raw materials store and tank compound"

Measurements:
overall: 550 mm x 1920 mm x 1230 mm, 107 kg
Object Number:
1990-97 Pt5
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Centrifuge Building

Model of Pruteen Plant Centrifuge Building

Model of Pruteen Plant Centrifuge building. Labelled "D - centrifuge building"

Measurements:
overall: 440 mm x 1150 mm x 800 mm, 28 kg
Object Number:
1990-97 Pt6
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Grinding and Packing Area

Model of Pruteen Plant Grinding and Packing Area

Model of Pruteen Plant Grinding and packing area. Labelled "E - grinding and packing area"

Measurements:
overall: 1150 mm x 1700 mm x 800 mm, 60 kg
Object Number:
1990-97 Pt7
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Drying and Scrubbing Area

Model of Pruteen Plant Drying and Scrubbing Area

Model of Pruteen Plant Drying and scrubbing area, one of two parts. Labelled "F1 - Drying & Scrubbing area"

Measurements:
overall: 1550 mm x 1610 mm x 180 mm, 87 kg
Object Number:
1990-97 Pt8
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Drying and Scrubbing Area

Model of Pruteen Plant Drying and Scrubbing Area

Model of Pruteen Plant Drying and scrubbing area, one of two parts. Labelled "F2 - Drying & Scrubbing area"

Measurements:
overall: 880 mm x 1870 mm x 1370 mm, 85 kg
Object Number:
1990-97 Pt9
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Fermenter Area

Model of Pruteen Plant Fermenter Area

Model of Pruteen Plant Fermenter area, one of two parts. Labelled "G1 - Fermenter area". This is the bottom half of the fermenter area.

More

This is an engineering model of one of the world’s largest ever fermenters, which stood at 60 meters tall. The fermenter was built by Imperial Chemical Industries in a hugely ambitious venture to make protein by fermenting microbes. Pruteen was a technical success, but a commercial failure. The technology was instead adapted to make vegetarian protein for humans – ‘Quorn’.

Measurements:
overall: 1480 mm x 2150 mm x 750 mm, 76.5 kg
Materials:
acrylic and polystyrene
Object Number:
1990-97 Pt10
type:
model
Image ©
The Board of Trustees of the Science Museum
ICI 'Pruteen' plant for manufacturing single cell protein, c 1980.

ICI 'Pruteen' plant for manufacturing single cell protein, c 1980.

Model of Pruteen Plant Fermenter area, one of two parts. Labelled "G2 - Fermenter area". This is the top half of the fermenter area.

More

This is an engineering model of one of the world’s largest ever fermenters, which stood at 60 meters tall. The fermenter was built by Imperial Chemical Industries in a hugely ambitious venture to make protein by fermenting microbes. Pruteen was a technical success, but a commercial failure. The technology was instead adapted to make vegetarian protein for humans – ‘Quorn’.

Measurements:
overall: 1730 mm x 680 mm x 690 mm, 56.5 kg
Materials:
acrylic and polystyrene
Object Number:
1990-97 Pt11
type:
models , pruteen , manufacturing plants and proteins
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Area Adjacent to Fermenter Area

Model of Pruteen Plant Area Adjacent to Fermenter Area

Model of Pruteen Plant, area adjacent to fermenter area. Labelled "H1 - adjacent to fermenter area"

Measurements:
overall: 790 mm x 2300 mm x 1200 mm, 130 kg
Object Number:
1990-97 Pt12
type:
model
Image ©
The Board of Trustees of the Science Museum
Model of Pruteen Plant Area Adjacent to Fermenter Area

Model of Pruteen Plant Area Adjacent to Fermenter Area

Model of Pruteen Plant, area adjacent to fermenter area. Labelled "H2 - adjacent to fermenter area".

Measurements:
overall: 1070 mm x 1100 mm x 750 mm, 27 kg
Object Number:
1990-97 Pt13
type:
model
Image ©
The Board of Trustees of the Science Museum
Architectural/ builder's model of the ICI 'Pruteen' plant at Billingham

Architectural/ builder's model of the ICI 'Pruteen' plant at Billingham

Architectural/ builder's model of the complete ICI Pruteen Plant at Billingham, Stockton on Tees, England, 1978-1983

More

This is an engineering model of one of the world’s largest ever fermenter factories. It was built by John Brown Engineers and Constructors for Imperial Chemical Industries in a hugely ambitious venture to make protein by fermenting microbes. Pruteen was a technical success, but a commercial failure. The technology was instead adapted to make vegetarian protein for humans – ‘Quorn’.

Measurements:
overall: 370 mm x 1690 mm x 1220 mm, 44 kg
Materials:
paper and acrylic
Object Number:
1990-97 Pt14
type:
architectural model and model - representation
Image ©
The Board of Trustees of the Science Museum