VT47/ TZ05-20 directly heated communication triode
VT47/ TZ05-20 directly heated communication Triode. 20 Watts. 6/600 HT Volts. 1.1 Amps.
- Object Number:
- Y2005.25.1
- type:
- aircraft valve
27 aviation-related valves in a display case :
VT47/ TZ05-20 Triode
VT25/ DET25 Triode
VT104/ PT15 Pentobe
VT60/ 807 Beam Tetrode
VT62/ DET12 VHF Triode
VT76/ TZ40 Zero bias Triode
VT61/ RK34 DET19 VHF Double Triode
VT47/ TZ05-20 directly heated communication Triode. 20 Watts. 6/600 HT Volts. 1.1 Amps.
VT25/ DET25 directly heated Triode. Communication. Power amplifier in early airborne HF transmistter T1083. Also used starpped as a diode to rectify grid bias in HF ground transmitter T1087. 36 Watts. 7.5/1200 HT Volts. 2 Amps.
VT104/ PT15 directly heated Pentobe. Communication. Two used in parallel as power amplifiers in HF airborne transmitter T1154. 30 Watts. 6/1.3 Volts. 1.25kV Amps.
VT60/ 807 indirectly heated Beam Tetrode. Communication. General purpose RF amplifier. Used as a crystal oscillator in modified T1087 transmitetr. 25 Watts. 6.3/1 Volts. 600 Amps.
VT62/ DET12 VHF Triode. Used for communication. Two in push-ull used in VHF R/T ground transmitetr T1131. 30 Watts. 7.5/3.25 Volts. 1.25kV Amps.
VT76/ TZ40 directly heated Zero bias Triode. Two used in push-pull as Class B modulators in T1131 transmitter. 40 Watts. 7.5/2.5 Volts. 1.25kV Amps.
VT61/ RK34 DET19 VHF Double Triode indirectly heated VHF double Triode used as a power amplifier in airborne VHF R/T transmisster TR1133. 27.5 Watts. 6.3/0.8 Volts. 300 Amps.
VT501 E1192 indirectly heated beam Terode used in airborne transmitter/receivers. 7.5 Watts. 6.3/0.8 Volts. 300 Amps.
VT88 832 indirectly heated push-pull beam power amplifier communication valve. 12.6/0/8 Volts. 400 Amps.
CV397 communication valve.
VT46 PT25H directly heated communication Pentode. 25 Watts. 4/2 Volts. 500 Amps
VT90 directly heated Triode. Heavy duty filament for pulse operation in radar. Used in early 1.5 m airborne radar. Two used in push-pull pulsed at 35 kilowatts. Known in RAF as 'micropup'. 100 Watts. 8.25/9 kV Volts. 7 Amps.
VR136 RL7 indirectly heated VHF Pentode used as RF amplifier in VHF radar receivers. 6.3 Volts. 0.3 Amps.
VR137 RL16 indirectly heated VHF Triode used as a local oscillator in VHF radar receivers.
VR91 EF50 used in radar receiver broad-band amplifiers etc.
VR92 EA50 indirectly heated VHF radar diode. Used as second detector in VHF radar receivers. 6.3 Volts. 1 Amp.
E3041 spark gap radar valve used for pulsing Magnetrons
VR135 indirectly heated VHF Triode for radar. Dual purpose receiver/transmitetr valve in IFF (Identification, Friend or Foe) sets. Used in super-regenerative circuit and sweeping frquencies from about 24 mHz down to VHF. Used also in VHF radar transponder
BABS (Blind Approach Landing System). 1 Watt. 6.9/500 Volts. 0.21 Amps.
VR65 SP61 indirectly heated HF Pentrode. Used in many radar applications, similar to VR91. Large cathode served to reduce 'noise' supposedly. 6.3 Volts. 0.63 Amps.
CV1482 multi-resonant cavity high power Magnetron for radar use. Pulsed at 450 kilowatts on 10 cm (2.98 gHz - 2980 kHz). Used in first operational airborne centimetric radar. The Magetron was an important WW2 technical innovation.
Relex Klystron used as local oscillator in 10 cm radar receivers. Very little output.
CV298 Reflex Klystron for 3 cm radar. Used as a local oscillator in receivers. Probe output.
CV129 American radar valve development of CV298
2K25 radar valve. American development of CV298
CV2282 Reflex Klystron. 3m width wave-guide ouput for radar
Rectangular wooden display case with labels for aviation valves.