Mather & Platt electric fire pump

Made:
circa 1938 in England
manufacturer:
Mather and Platt Limited

Mather & Platt electric fire pump, used for driving a sprinkler system at Blackpool Town Hall. cast iron; A centrifugal impeller pump and motor, switchgear, resister bank for starting motor, switchgear and resistor bank (or shunt).

The pump is a fine example of a Manchester-built Mather and Platt fire pump. Whereas several steam powered fire pumps of the early twentieth century survive in preservation, this is the only electrically driven pump of its era made by this famous local company which this museum has acquired at the time of writing in 2009.

Details

Category:
Pumping Machinery
Object Number:
Y2008.69
Materials:
cast iron
Measurements:
overall: 1000 mm x 3000 mm x 2000 mm,
type:
fire pump

Parts

Three Phase Isolator and Diaphragm Switch of Mather & Platt Electric Fire Pump

Three Phase Isolator and Diaphragm Switch of Mather & Platt Electric Fire Pump

Three phase isolator and diaphragm switch of Mather and Platt electric fire pump: for driving a sprinkler system used at Blackpool Town Hall.

Measurements:
610 mm x 520 mm x 350 mm, 286 kg
Materials:
cast iron and Part of a centrifugal impeller pump and motor, switchgear, resister bank for starting motor, switchgear and resistor bank (or shunt)
Object Number:
Y2008.69.5
type:
fire pump system part
Image ©
The Board of Trustees of the Science Museum
Three-phase Motor Shunt Windings from Mather & Platt Electric Fire Pump

Three-phase Motor Shunt Windings from Mather & Platt Electric Fire Pump

Three-phase motor shunt windings from Mather & Platt electric fire pump used for driving a sprinkler system at Blackpool Town Hall.

Measurements:
610 mm x 520 mm x 350 mm, 194 kg
Materials:
steel and Part of a centrifugal impeller pump and motor, switchgear, resister bank for starting motor, switchgear and resistor bank (or shunt)
Object Number:
Y2008.69.6
type:
shunt winding
Image ©
The Board of Trustees of the Science Museum
Reserve Supply of Mather & Platt Fire Sprinker Heads

Reserve Supply of Mather & Platt Fire Sprinker Heads

Mather & Platt fire pump sprinkler heads, cabinet for reserve supply.

Part of a centrifugal impeller pump and motor, switchgear, resister bank for starting motor, switchgear and resistor bank (or shunt)

Measurements:
overall: 241 mm x 292 mm x 169 mm,
Object Number:
Y2008.69.22
type:
cabinet
Image ©
The Board of Trustees of the Science Museum