Marine timekeeper with constant force escapement

Made:
1795 in London
Marine timekeeper with constant force escapement Marine timekeeper with constant force escapement Marine timekeeper with constant force escapement

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Science Museum Group / The Clockmakers' Museum
© The Board of Trustees of the Science Museum, London

Science Museum Group /The Clockmakers' Museum
© The Board of Trustees of the Science Museum, London

Science Museum Group /The Clockmakers' Museum
© The Board of Trustees of the Science Museum, London

Marine chronometer by Howells & Pennington, London, c.1795, commissioned by Thomas Mudge junior, to his father Thomas Mudge's design. including winding key c.1795. Outer wooden box with integral pivoted stand. Movement in a separate octagonal brass case with glazed sides and base. Gilt dial plate with two subsidiary enamel dials, one for hours and minutes and the other for seconds. The dials are surrounded with pierced and carved silver plaques. Movement of 36-hour duration, with Mudge's constant-force escapement. Plain balance with compensation curb. The balance pivots run between anti-friction wheels. The mainspring barrel is fixed, the fuzee chain winding on a drum attached to the barrel arbor. Signed 'Howells & Pennington for Thos Mudge 1795 No 7'.

In old age the clock- and watchmaker Thomas Mudge was unable to continue his work. His son, Thomas Mudge Junior, commissioned other makers to produce chronometers on behalf of his father, and to his designs. However, they were difficult to construct and did not work as well as Mudge Senior's. This and their high cost (£157 each) caused the project to ultimately fail. Only around 15 were ever made, of which this is one.

Clockmakers' Museum No. 606

Details

Category:
Clockmakers
Collection:
The Worshipful Company of Clockmakers
Object Number:
L2015-3488
Materials:
silver (alloy), brass (copper, zinc alloy), steel (metal), enamel, glass and mahogany (wood)
Measurements:
overall: 140 mm x 196 mm x 180 mm,
type:
constant force escapement and chronometer
credit:
Lent by the Worshipful Company of Clockmakers

Parts

Box for a marine timekeeper

Box for a marine timekeeper

Box for a marine timekeeper

Object Number:
L2015-3488/2
type:
box