Recording drum from Golitsyn seismograph

PART OF:
Three-component seismograph designed by Boris Golitsyn
Made:
1937
Recording drum, part of Galitzin seismograph.

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Recording drum, part of Galitzin seismograph.
Science Museum Group
© The Board of Trustees of the Science Museum

Recording drum, made by staff at Kew Observatory, Richmond, London, 1937. This drum is part of the three-component seismograph designed by Russian seismologist Boris Golitsyn (Galitzin), but is a later modification to the original instrument. The drum enabled all three components of earth motion to be recorded on a single sheet of paper, and replaced the three separate drums original to the instrument.

Seismographs designed by Boris Golitsyn were widely adopted in Russia and European observatories in the early decades of the twentieth century to detect the faint waves from distant earthquakes. Unlike other fully mechanical seismographs at the time, the seismograph registers earth motion electromagnetically. The boom of each of the three pendulum units carries an induction coil at its end, which is located between the poles of a pair of magnets. Movement of the boom generates induction currents proportional to the displacement velocity. The currents are fed through galvanometers whose mirrors reflect light beams onto a photographic chart.

Details

Category:
Geophysics
Object Number:
1966-94 Pt 3
type:
seismographs
credit:
Meteorological Office