Propeller: four bladed, wind tunnel model, with blades to prop shaft connector

PART OF:
Small Wind tunnels Propeller Wind Tunnels Models from the RAE
Made:
1916-1970
SMG00191974 SMG00191974
SMG00191974 SMG00191974

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

License this image for commercial use at Science and Society Picture Library

License

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

License this image for commercial use at Science and Society Picture Library

License

SMG00191974
Science Museum Group
© The Board of Trustees of the Science Museum

SMG00191974
Science Museum Group
© The Board of Trustees of the Science Museum

Model, Propeller: four bladed, wind tunnel model, with blades to prop shaft connector

Details

Category:
Farnborough
Object Number:
1993-3107/21
type:
model

Related Objects

Replica of elevation surface as used in the Nulli Secundus airship, 1907.

Replica of elevation surface as used in the Nulli Secundus airship
Fin control unit for the TSR2 aircraft, employing a military duplex powered flying control with triplex electric input.

Fin control unit for the TSR2 aircraft
Standard Cell Weston Type 1149 1.01859 ABS Volts at 20 degrees C. No. 133480, by H. Tinsley & Co. Ltd., London, SE25, England.

Standard Cell Weston Type 1149 1.01859 ABS Volts at 20 degrees C. No. 133480
Standard resistor type 1659 100 ohm No. 98062, by H. Tinsley & Co. Ltd., London, SE25, England.

Standard resistor type 1659 100 ohm No. 98062

3 sample cards of various fabrics

Sample of card showing different colours and sizes of Velcro