Irvin motor vehicle seat belt only

Made:
1955-1965

Irvin motor vehicle seat belt only, in Irvin manufacturers box, and with three anchorage devices attached. No instruction leaflet. Outside of the box is marked: Irvin, Min V 93, Driver, Mk 3, Car seat belt, CH4/C.

Details

Category:
Road Transport
Object Number:
1998-293
type:
seat belt
credit:
Transport Research Laboratories Limited

Parts

Irvin motor vehicle seat belt length with two anchorage devices attached. There is a 'male' type clip at one end and this is locked with Inv1998-293 Pt2.

Irvin motor vehicle seat belt, with two attached anchorage devices

Irvin motor vehicle seat belt length with two anchorage devices attached. There is a 'male' type clip at one end and this is locked with Inv1998-293 Pt2.

Object Number:
1998-293 Pt1
type:
seat belt
Irvin motor vehicle seat belt length with one anchorage device attached. There is a 'female' type buckle at one end and this is locked with Inv1998-293 Pt1. The buckle is marked, 'Dynasafe'; BS3254; Ejectomatic sixty six.

Irvin motor vehicle seat belt, with one attached anchorage device

Irvin motor vehicle seat belt length with one anchorage device attached. There is a 'female' type buckle at one end and this is locked with Inv1998-293 Pt1. The buckle is marked, 'Dynasafe'; BS3254; Ejectomatic sixty six.

Object Number:
1998-293 Pt2
type:
seat belt
Makers box marked Irvin, MinV93, Driver, CH4/C,MK3. Also, two plastic washers.

Makers box marked Irvin

Makers box marked Irvin, MinV93, Driver, CH4/C,MK3. Also, two plastic washers.

Object Number:
1998-293 Pt3
type:
seat belt
Irvin cardboard box for seatbelt

Irvin cardboard box for seatbelt

Makers box marked Irvin, MinV93, Driver, CH4/C,MK3

Object Number:
1998-293 pt3/1
type:
box - container
Image ©
The Board of Trustees of the Science Museum
Part of:
1998-293 Pt3
Fittings for Irvin MinV93 Seat Belt

Fittings for Irvin MinV93 Seat Belt

Two fixings for Irvin MinV93 Driver CH4/C MK3 seat belt

Object Number:
1998-293 pt3/2
type:
fixings
Image ©
The Board of Trustees of the Science Museum
Part of:
1998-293 Pt3

Related Objects

Villiers Mk 6E two-stroke motorcycle engine, sectioned, made by the Villiers Engineering Co. Ltd., 1951

Villiers Mk 6E two-stroke motorcycle engine, 1951
Hella 70/9-12 cigarette lighter, in cardboard box. c.1957

Hella 70/9-12 cigarette lighter
Unic taxicab, built in 1922, with the chassis and engine being manufactured by Unic in Puteaux, France, and the bodywork constructed by W R Wood in England. This Landaulette type taxi is powered by a 13.9 hp, four-cylinder, monobloc engine with a cone-type clutch, hand-brake controlled rear-wheel drum brakes, and a four-speed gearbox. The petrol tank is under the driver’s seat. This vehicle is capable of transporting up to four passengers in the enclosed rear section. There is a foldable hood over the rear passenger seats in case of bad weather, while there is a fixed roof over the otherwise open driver’s seat and front portion of the enclosed passenger section.

'Unic' motor taxi, complete
J.A.P. motor cycle carburettor, 1912

J.A.P. motor cycle carburettor, 1912
Pioneer engine operated tyre pump

Motor car tyre pump
Fowler 10 h.p. Supreme showman's steam traction engine, 1933, model (scale 1:8)

Fowler 10 h.p. Supreme showman's steam traction engine