Engraving Machine used by Monotype Corporation

Engraving Machine used by Monotype Corporation Engraving Machine used by Monotype Corporation

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Science Museum Group
© The Board of Trustees of the Science Museum

Science Museum Group
© The Board of Trustees of the Science Museum

Engraving machine, Plant No.1329, made by Taylor-Hobson Ltd. (part of the Rank Company), England, 1951-1960. Part of the equipment used in the production system for Monotype matrices.

This machine is one of many used in the process to make a 0.2-inch (0.51cm) or 0.4-inch (1.02cm) matrix. Some of the machines were designed at the Monotype factory in Salfords, Surrey, and other machines were purchased and adapted by Monotype.

There were 82 separate processes needed to transform a designer’s drawing of a letter, figure, punctuation or symbol into a piece of Monotype metal type for printing. A pantograph was used to trace and cut the letter from a copper pattern into a piece of steel called a punch. After being hardened, the punch was driven into a piece of bronze using a crank press to produce a matrix. The finished matrix was ready to go to the Monotype Composition Caster where molten metal was pumped through a mould against the matrix to produce a piece of type.

Details

Category:
Printing & Writing
Collection:
Monotype Corporation Collection
Object Number:
1995-1533
Materials:
steel (metal), aluminium alloy and plastic (unidentified)
Measurements:
overall: 1380 mm x 1060 mm x 670 mm,
type:
machines