Image
Category
On Display
Object type
Maker
Place of origin
Archive
Date
GL Mk.1 radar transmitter. When used in its operational role, the console was housed in a small rotational cabin, mounted on a turntable, or a mobile chassis, with the aerial system above on a framework which could be raised or lowered and dismantled for travelling. Power supplies, telephones, and input / output information lines were fed into the cabin via a system of slip-rings and the cabin rotated by a traversing control column. Synchros carried high-speed and low-speed range and bearing data to a predictor which, after processing the information, inserting various corrections, and calculating a fuze setting, produced polar co-ordinates for laying a battery of guns. The GL Mk.1 transmitter was designed to radiate a pulse of 1.5-3 microseconds duration at a recurrence frequency of 800-2000Hz, the radio frequency being 55-85MHz and the pulse having a peak power of the order of 50kW. The timing of the pulses was controlled by the modulator unit which was situated, with a spare, in the upper left-hand compartment. In this unit, a variable-frequency blocking oscillator and associated shaping circuits generated pulses which, after amplification, passed to the radio-frequency oscillators as positive pulses super-imposed on the steady negative 100-volt grid bias. The grid bias of the oscillator valves was thus reduced nearly to zero for a few microseconds every time the pulse was generated. The oscillator valves were a pair of VT58 valves connected in a push-pull tuned-grid tuned-anode circuit in which lecher lines were employed instead of lumped inductance and capacitance. A low impedance line connected the cathode circuit of the oscillators to the grids of the neutralised triode amplifiers, the anode circuit of which was also tuned by the lecher lines and tapped to feed the aerial. A bank of lamps was provided to simulate the aerial load for tunning purposes and the power output was measured by comparing the brightness with that of a standard lamp supplied from the mains through a variable resistance calibrated in watts. A cathode ray monitor was fitted at the left-hand side in order to check the pulse shape and facilitate tuning. It was fed from tapping points on the high frequency (hf) choke in the aerial coupling system while the time-base deflection voltage was derived from the modulator unit.

GL Mk.1 radar transmitter, 1939

Radio Communication

1939