Collection
Collection
Learning
The group
Visit us
Expand child menu
Science Museum
National Science and Media Museum
Science and Industry Museum
National Railway Museum
Locomotion
Science and Innovation Park
Collection
Search
About
Search
About
Collection
Learning
The group
Visit us
Expand child menu
Science Museum
National Science and Media Museum
Science and Industry Museum
National Railway Museum
Locomotion
Science and Innovation Park
Design Information (Gen)
PART OF:
Drawings and Technical Information Produced by W.F. Stanley and Co. Ltd.
part of archive:
Drawings and Technical Information Produced by W.F. Stanley and Co. Ltd.
Details
Extent:
3 boxes
Identifier:
STAN3/19
Access:
Open Access
System of Arrangement:
Show
This series was originally one drawer in the W.F. Stanley filing cabinets
copyright:
Show
Copies may be supplied in accordance with current copyright legislation and Science Museum Group terms and conditions
Browse this archive
Drawings and Technical Information Produced by W.F. Stanley and Co. Ltd.
STAN3/01 Drawings Govt. G 1-30"
STAN3/01/01 Note
STAN3/01/02 G1 Tracings Compass Patt 1151A
STAN3/01/03 G1 GOVRM DRWGS [Pattern 01151A compass]
STAN3/01/04 G2 GOVRM DRWGS [Pattern 0183 Boat's Compass]
STAN3/01/05 G2 TRACINGS [Pattern 0138 Boats Compass]
STAN3/01/06 G3 TRACINGS [Pattern 0921 Compass]
STAN3/01/07 G3 GOVRM DRWGS [Pattern 0921 Trawler Steering Type Compass]
STAN3/01/08 G5 TRACINGS FLINDERS BAR BRACKET PATT 923
STAN3/01/09 G5 GOVRM DRWGS [Pattern 923 Flinders Bar Bracket]
STAN3/01/10 G6 TRACINGS [Pattern 02B Compass]
STAN3/01/11 G7 TRACINGS [Pattern 02B Compass]
STAN3/01/12 G8 GOVRM DRWGS [Number 4 Azimuth Circle]
STAN3/01/13 G8 TRACINGS [Number 4 Azimuth Circle]
STAN3/01/14 G9 TRACINGS COMPASS PATT 0195A
STAN3/01/15 G10 TRACINGS [Pattern 1152 Azimuth Circle]
STAN3/01/16 G11 TRACINGS [1950 pattern Azimuth]
STAN3/01/17 G11 GOVRM DRWGS [1950 Azimuth Circle]
STAN3/01/18 G13 TRACINGS [Merchant Navy type Azimuth Circle and transit case]
STAN3/01/19 G13 GOVRM DRWGS [Merchant Navy type Azimuth Circle]
STAN3/01/20 G14 TRACINGS AZIMUTH PATT 6703 CD(G)974
STAN3/01/21 G17 TRACINGS RULE SIGHTING No1 MK III(L)
STAN3/01/22 G15 TRACINGS [Mark II(L) Fall of Shot Decoder]
STAN3/01/23 G14 GOVRM DRWGS [Pattern 6703 Gyro Azimuth Circle]
STAN3/01/24 G15 GOVRM DRWGS [Mark I(L) and Mark II(L) Fall of Shot Decoder]
STAN3/01/25 G18 [Marking of Repaired Naval Compasses]
STAN3/01/26 20 TRACINGS [Pattern 4302 Gyro Azimuth]
STAN3/01/27 G20 GOVRM DRWGS [Pattern 4302 Gyro Azimuth Circle]
STAN3/01/28 G22 [Number 3 Mark II(L) Sighting Rule]
STAN3/01/29 G24 [Type 05 Standard Corrector]
STAN3/01/30 G25 GOVRM DRWGS [Pattern 5 Healing Error Instrument]
STAN3/01/31 G25 TRACINGS HEELING ERROR INSTRUMENT PATT 5
STAN3/01/32 [Pattern 216 Junction Box]
STAN3/01/33 G28 [Number 3 Mark 1 Parallel Rolling Rule Rule]
STAN3/01/34 G30 GOVRM DRWGS [Pattern 1135 Moulded Type Corrector]
STAN3/01/35 G29 [W.D. 34 Type Compass]
STAN3/02 Drawings Govt. G 31-69
STAN3/02/01 G34 GOVRM DRWGS [Patterns 211, 212 and 213 Electric Light & Dimmer Fittings]
STAN3/02/02 G33 GOVRM DRWGS [Pattern 897 Terminal Box for Compass Corrector Coil]
STAN3/02/03 G37 [Graphs Showing Diameter of Jewel Cup Plotted Against Depth of Various Radii of Curvature]
STAN3/02/04 G35 GOVRM DRWGS [Corrector Coil for the pattern 1960 Binnacle and F.E. Coil pattern 925D3]
STAN3/02/05 G38 [Mark III 18 inch Rule Sight]
STAN3/02/06 G41 GOVRNM TRACINGS [Pattern 81 6 inch Station Pointer]
STAN3/02/07 G41 TOOL DRAWINGS [components for various machine tools]
STAN3/02/08 G42 GOVRM DRWGS [Wrist Compass]
STAN3/02/09 G43 [Pattern 8314 Azimuth Circle]
STAN3/02/10 G43 GOVRM DRWGS [Pattern 8134 Azimuth Circle]
STAN3/02/11 G43 GOVRM DRWGS [Pattern 8134 Azimuth Circle]
STAN3/02/12 G44 TRACINGS COMPASS PATT 8131 DRG CD 10115
STAN3/02/13 G44 GOVRM DRWGS [Pattern 8131 Compass]
STAN3/02/14 G44 (GOVT DRGS) [Pattern 8131 Compass]
STAN3/02/15 G44 GOV DRWG [Pattern 8131 Compass]
STAN3/02/16 G45 [Pattern 0195.TA Compass]
STAN3/02/17 G47 TRACINGS [Admiralty Quintants]
STAN3/02/18 G47 [Admiralty Quintant]
STAN3/02/19 G51 M/7209/1-53 MASTERS [7209A Compass]
STAN3/02/20 G49 [6 inch "A" Proportional Compass and 6 inch "B" Proportional Compass]
STAN3/02/21 G50 [Pattern 01151A Compass]
STAN3/02/22 G52 [Pattern 925D, 933 and 933D2 Heeling Error Compass Corrector Coils]
STAN3/02/23 G53 [Bubble - Standard 19]
STAN3/02/24 G54 [Pattern 1951 Steering Prism]
STAN3/02/25 G55 [Dines Tilting Syphon Raingauge]
STAN3/02/26 G56 [Portable Manometer]
STAN3/02/27 G59 SEXTANT PATT 491M
STAN3/02/28 G61 [Spirit Level]
STAN3/02/29 G63 [Pattern 8124 Azimuth]
STAN3/02/30 G64 TRACINGS [Pattern 160441 Tripod]
STAN3/02/31 G66 [Compass Type W.D. 32]
STAN3/02/32 G65 DINES RAINGAUGE
STAN3/02/33 G64 GOVNT DRAWINGS
STAN3/03 Customers' Drawings A - Z
STAN3/03/01 PRISMATIC COMPASSES
STAN3/03/02 [Marching Compass]
STAN3/03/03 D.145 PRISMATIC MARCHING COMPASS
STAN3/03/04 MARCHING COMPASS
STAN3/03/05 MISC SPECS AIR MINISTRY (MET OFFICE) ACO
STAN3/03/06 [PATT. 921 Compass]
STAN3/03/07 9222 BINNACLE
STAN3/03/08 [A2 Azimuth Circle]
STAN3/03/09 A.542 PATT. 8131 COMPASS
STAN3/03/10 A.511 COMPASS PATT. 8131
STAN3/03/11 A.524 BINNACLE PATT 1869 189 ETC
STAN3/03/12 A.548 1151 COMPASS PACKING SPEC
STAN3/03/13 A.512 5" & 6" SPHERES (1 SET OF DWGS)
STAN3/03/14 A.510 AMENDED DWGS PATT 53 BINNACLE
STAN3/03/15 A.562 491 SEXTANT REPAIR
STAN3/03/16 [Drafting Scales and Compasses]
STAN3/03/17 C.183 PATT 160170 COMPASS DRGS. CDM 1411 1412
STAN3/03/18 C.186 TOGGLE CATCH
STAN3/03/19 C.187 [18" Scale]
STAN3/03/20 D.162 [Centimetre Scale for Use with Creep Extensometer]
STAN3/03/21 D.163 [Centimeter Scale For Use With Creep Extensometer]
STAN3/03/22 E.120 [Dust Shield]
STAN3/03/23 E.121 [1/10 & 1/20 Scale]
STAN3/03/24 E.122 [1/10 & 1/20 Scale ]
STAN3/03/25 E.125 [Spirit Level]
STAN3/03/26 E.128 [Inspection Department Glass Prism]
STAN3/03/27 G.64 [Levels, F.S., 4 Feet, Mark IV]
STAN3/03/28 G.67 [Mavitta Type Al Machine]
STAN3/03/29 G.69 [Drafting Machine Scales]
STAN3/03/30 G.71 [Scales Designed to fit "ALLBRIT" unit - 1 at 12" long, 1 at 18" long]
STAN3/03/31 G.72 [Scale in Inches and Metres]
STAN3/03/32 G.73 [12" & 18" scales for use with ALLBRIT Drafting M/Cs]
STAN3/03/33 G.74 [Scales for Rulers]
STAN3/03/34 G.75 [Sketches]
STAN3/03/35 H.377 [Hairline Graticule Etching]
STAN3/03/36 I.211 COMPASS. PRIS MK III MILS MK I
STAN3/03/37 I.208 COMPASS PRIS. MKIII MILS MK I
STAN3/03/38 SPARE SPECIFICATIONS
STAN3/03/39 I.225 INDICATOR FUZE L5 105MM NO2 MK1 AMENDMENT 14
STAN3/03/40 I.197 MAGNIFIER P.M.4
STAN3/03/41 I.238 CASE GUN RULE NO1 MK1 CONTRACT A.70713
STAN3/03/42 I.251 [Drawings Relating to Several Diffrent W.F. Stanley Contracts]
STAN3/03/43 I.150 [Emitter Disc]
STAN3/03/44 I.152 [Sheet of Glass Produced for I.C.T. (Engineering) Ltd]
STAN3/03/45 I.161 [Emitter Disc for a Serial Card Reader]
STAN3/03/46 I.166 [Emitter Disc for a Serial Card Reader]
STAN3/03/47 I.171 [Plate Glass produced for I.C.T. (Engineering) Ltd]
STAN3/03/48 I.173 [Glass cover for a sensing head from an On Demand Card Reader]
STAN3/03/49 I.193 [Glass cover for a sensing head from an On Demand Card Reader]
STAN3/03/50 I.196 [Glass plate produced for I.C.T. (Engineering) Ltd]
STAN3/03/51 I.204 [Emitter disc from a Serial Card Reader]
STAN3/03/52 I.209 [Twin Track Emitter Disc]
STAN3/03/53 I.212 [Glass cover for a sensing head from an On Demand Card Reader]
STAN3/03/54 I.214 [Glass Plate produced by I.C.T. (Engineering) Ltd]
STAN3/03/55 I.216 [Emitter Disc from a Serial Card Reader]
STAN3/03/56 I.217 [Emitter Disc for a Serial Card Reader]
STAN3/03/57 I.219 [Glass plate produced for I.C.T. (Engineering) Ltd]
STAN3/03/58 I.219 [Emitter Disc from a Serial Card Reader]
STAN3/03/59 I.224 [Glass plate produced for I.C.T. (Engineering) Ltd]
STAN3/03/60 I.230 [Glass plate produced for I.C.T. Engineering Ltd]
STAN3/03/61 I.231 [Emitter Disc for a Serial Card Reader]
STAN3/03/62 I.232 [Emitter Disc for a Serial Card Reader]
STAN3/03/63 I.237 [Emitter Disc for a Serial Card Reader]
STAN3/03/64 I.258 [Glass plate produced for I.C.T. (Engineering) Ltd]
STAN3/03/65 I.261 [Shaft & Chuck Details for Photo-Electric Tacho-Generator 6000 Series]
STAN3/03/66 I.266 [Masking Plate]
STAN3/03/67 L.77 [sketch showing measurements and camber of edges]
STAN3/03/68 N.54 [Metric Scale Rule]
STAN3/03/69 Q.1 [Screw, Securing, Charge Reader]
STAN3/03/70 Q.2 [Spare Gun Rules]
STAN3/03/71 R.146 [Various scales for rulers and set squares]
STAN3/03/72 S.570 [Scale rules and other components]
STAN3/03/73 M.273 RAINGAUGE
STAN3/03/74 BOOTS PROJ 2X2
STAN3/03/75 BOOTS 150 2X2 PROJ
STAN3/03/76 85MM F/2.8 LENS BOOTS
STAN3/03/77 AUTOMATIC DRAFTING MACHINE
STAN3/03/78 AUTO DRAFTING MACHINE
STAN3/04 Drawings A - C
STAN3/04/01 PILLAR BINNACLE
STAN3/04/02 RACING YACHT COMPASS DWGS
STAN3/04/03 TOP RAIL EXTENSION ASSY INFORMATION SHEET
STAN3/04/04 CLINOMETER 7" V13
STAN3/04/05 HANDWHEEL & CLIP SPRING
STAN3/04/06 BUBBLE FITTINGS (STD). - DRAWINGS 316.
STAN3/04/07 BAROMETER & CLOCK CASE CANCELLED DRWGS
STAN3/04/08 P.M.C.
STAN3/04/09 [Untitled]
STAN3/04/10 P.M.C. Drawings
STAN3/04/11 SCHEDULE OF PARTS DR1-10 DRAWING LISTS
STAN3/04/12 DRAFTING M/C 662
STAN3/04/13 AMERICAN TYPE. MK.II.A and MK.III. DRAWING NO. 730.
STAN3/04/14 GLIDEMASTER
STAN3/04/15 RAIL (VERTICAL)
STAN3/04/16 GLIDEMASTER DRWGS
STAN3/04/17 [Untitled]
STAN3/04/18 [Untitled]
STAN3/04/19 S.W.M.F. COMPASS (CADET) DRAWIN[GS]
STAN3/04/20 CASE FITTINGS
STAN3/04/21 COMPASS BOSUN (SWMF NO 2) 040-SERIES
STAN3/04/22 S.W.M.F. COMPASS (PILOT) NO 4 DRAWINGS 736
STAN3/04/23 COMPASS BOSUN (SWMF NO2) 41-SERIES
STAN3/05 Drawings D - Q
STAN3/05/01 RANGE OF LEVELS
STAN3/05/02 SITEMASTER HOLDALL KIT
STAN3/05/03 ENGINEER'S LEVEL
STAN3/05/04 STRAIGHTNESS LEVEL - SPACEMASTER
STAN3/05/05 DRAFTING M/C STANLEY 1500 MACHINE 61830-
STAN3/05/06 DRAFTING M/C PARALLEL MOTION - DRAWINGS 656
STAN3/05/07 DRAFTING M/C STANLEY 1500 360° HEAD
STAN3/05/08 DRAFTING M/C HEAD 360° 0502755-0502802
STAN3/05/09 DRAFTING MACHINE NO. 1 DWG 49/
STAN3/05/10 DRAFTING MACHINE NO.2 DRAWINGS NO. 645
STAN3/05/11 U.K. OPTICAL DRG. 16675.
STAN3/05/12 EYEPIECE .4" BECK 0700987
STAN3/05/13 EYEPIECES .45" & .5" (RAMSDEN)
STAN3/05/14 GUN RULE
STAN3/05/15 HARMONIC ANALYSER NO.1 472
STAN3/05/16 L/O (0.3) EYEPIECE ASSY
STAN3/05/17 SPACEMASTER MK. II DRAWINGS 711
STAN3/05/18 HEELING ERROR PATT: 5
STAN3/05/19 INTEGRATOR NO.2 106
STAN3/05/20 ABNEY LEVEL POCKET REFLECTING LEVEL
STAN3/05/21 DRAFTING MACHINE HEAD 360° HEAD 61151-61
STAN3/05/22 DRAFTING M/C - SPACEMASTER MK III 0502633 - 0502899
STAN3/05/23 DRAFTING MACHINE - SPACEMASTER 61155-61460
STAN3/05/24 DRAFTING M/C STANLEY 1500 MACHINE 61697-61829
STAN3/05/25 [Untitled]
STAN3/05/26 SPACEMASTER DRA[FTING MACHINE] PACKING [CARTON]
STAN3/05/27 DRAFTMASTER MK II
STAN3/05/28 ENGINEERS LEVEL NO. 34249 - 34299
STAN3/05/29 PORTABLE SKID RESISTANCE TESTER 679/100-
STAN3/05/30 FLOWLINE DRAFTING M/C J40.
STAN3/05/31 SPACEMASTER 7/2 JUMBO
STAN3/05/32 LEVEL - ALLBRIT
STAN3/05/33 ENGINEERS LEVEL 34011-34091
STAN3/05/34 ENGINEER'S LEVEL 38010 - 38057 34425 - 344862 34496PC 34503
STAN3/05/35 ENGINEERS LEVEL NO. 34172PC 34178 - 34248
STAN3/05/36 DRAFTING M/C SPACEMASTER MK III 0502900-
STAN3/05/37 ENGINEER'S LEVEL 34300-34365, 34505, 34507
STAN3/05/38 DRAFTING MACHINE SPACEMASTER 61629-
STAN3/06 Drawings R - Z
STAN3/06/01 PLANIMETER, LARGE SLIDING BAR 142
STAN3/06/02 PLANIMETER (CONTINUOUS CHART - SMALL TYPE) 269
STAN3/06/03 REV LEVEL OLD DRGS
STAN3/06/04 PANTOGRAPH & EIDOGRAPH G.A.
STAN3/06/05 42" PATOGRAPH 184
STAN3/06/06 DRG 61
STAN3/06/07 STANLEY POPULAR LEVEL 655
STAN3/06/08 [Untitled]
STAN3/06/09 SLIDING BAR FIXED ARM PLANIMETER. DRG. NO. 27
STAN3/06/10 AUTOMATIC READING PLANIMETER
STAN3/06/11 PRECISION DISC PLANIMETER
STAN3/06/12 PLANIMETER RULE FORM Q100 AK. 489
STAN3/06/13 PLANIMETERS POLE WAGONS 1158 ZERO SETS 51178 0500729 - 0500733 (0500730 - 51178)
STAN3/06/14 SLIDING BAR PLANIMETER 56
STAN3/06/15 RELAY LOUDSPEAKER
STAN3/06/16 RAIN GAUGE 490 & 501 DRWGS
STAN3/06/17 5" SYMONS RAIN GAUGE
STAN3/06/18 SOUND OPTICAL UNIT DRG. 81,000/-- DRG. 38040/1/2. 563
STAN3/06/19 STAND FOR PRISMATIC COMPASS - 280
STAN3/06/20 LEVELLING STAVE & SCOTCH STAVE CANCELLED DRWG'S
STAN3/06/21 STANDARD SCREWS, NUTS & WASHERS STANDARD BUBBLE FITTINGS
STAN3/06/22 KELVIN HUGHES SEXTANT 41035
STAN3/06/23 STAND, TUMBLE OVERHEAD - 352
STAN3/06/24 STAND JOHNSON HEAD 476
STAN3/06/25 LIGHT ALLOY STAFF 10, 16, 18 & 22 ft. 3 METRE & 4.25 METRE.
STAN3/06/26 [Untitled]
STAN3/06/27 [Untitled]
STAN3/06/28 130M SEXTANT
STAN3/06/29 SEXTANT PATT 120E DRAWING NO 79
STAN3/06/30 ASTRONOMICAL TELESCOPE - DRAWINGS 663
STAN3/06/31 UNICAM DRAWINGS
STAN3/06/32 THEODOLITE, OPTICAL SCALE S.1 606-1
STAN3/06/33 THEODOLITE OPTICAL SCALE NO.S.1. DRG. 468
STAN3/06/34 [Untitled]
STAN3/06/35 DRAFTING MACHINE SCALES INCLUDING SCALES METRIC 300-400-500MM PLASTIC
STAN3/06/36 LEVEL - SITEMASTER
STAN3/06/37 GLASSWORK DRGS FOR SEXTANTS MISC DRGS
STAN3/06/38 [Untitled]
STAN3/06/39 SEXTANT ADMIRALTY PATT. NO.491.M.
STAN3/06/40 STAR TELESCOPE FOR SEXTANT. DRAWINGS NO. 88.
STAN3/06/41 SEXTANT STAR TELESCOPE
STAN3/06/42 SEXTANT DRG NOS 251, 257, 265 & 505
STAN3/06/43 [Untitled]
STAN3/06/44 THEODOLITE INSTRUCTIONAL
STAN3/06/45 SEXTANT CASE FITTINGS DRG NO 140 41425
STAN3/06/46 14' LIGHT ALLOY S. STAFF F10
STAN3/06/47 ADMIRALTY QUINTANT - G.47
STAN3/06/48 LIGHTING FITTINGS MC1 & 130M DRGS 79 & 89
STAN3/06/49 SEXTANT MC1
STAN3/06/50 THERMOMETERS F1-15, X108, X108 WITH REVOLVING SHUTTER, E112 THERHD
STAN3/07 Tracings 1 - 150
STAN3/07/001 5 [5" Hair Dividers]
STAN3/07/002 6 [Bearing Spanner]
STAN3/07/003 7 [6" Ruling Pen]
STAN3/07/004 8 [5" Ruling Pen]
STAN3/07/005 9 [6" Slow Motion Dividers]
STAN3/07/006 10 LEVEL SHAFTING 12 INCH
STAN3/07/007 11 [Micrometer (Hamblin's' Patt)]
STAN3/07/008 12 [2 1/2" Pocket Sextant]
STAN3/07/009 13 [B.E. Bows (Square Joints)]
STAN3/07/010 15 NOAM THERMOMETER
STAN3/07/011 14 [Planimeter Unit (Amsler Patt)]
STAN3/07/012 16 [Compass (3" Prismatic Dry)]
STAN3/07/013 17 [Ships Bearing Plate No.42]
STAN3/07/014 18 [8", 10" & 12" Chemical Thermometers]
STAN3/07/015 19 [Galvanometer Mirror Scale]
STAN3/07/016 20 [Open Sight Cross Staff]
STAN3/07/017 21 [Topzero & Clearform Thermometer]
STAN3/07/018 22 [Optical Square]
STAN3/07/019 24 ARTIFICIAL HORIZON
STAN3/07/020 25 [3 1/2" Air Sextant]
STAN3/07/021 26 [Admiral Friends Pelorus]
STAN3/07/022 27 PLANIMETER, FIXED ARM
STAN3/07/023 28 [Angle Type Thermo]
STAN3/07/024 29 3 1/2 INCH MICRO THEODOLITE
STAN3/07/025 31 [3 1/2 Micro Theod]
STAN3/07/026 49 1 - 30 TRACINGS D/M HEAD DETAILS
STAN3/07/027 32 [Instrument Plotting]
STAN3/07/028 33 [5" Symons Rain Gauge]
STAN3/07/029 35 H.Ps AND MOULDING FOR SEXTANTS
STAN3/07/030 36 [5" Trough Compass]
STAN3/07/031 38 [Rule, Parallel, 18" (Fields) U1187]
STAN3/07/032 39 [S.R. Stand Large]
STAN3/07/033 40 THERMO SHORT WATER H79
STAN3/07/034 41 [Thermometer Pocket E104]
STAN3/07/035 42 THERMOMETER E105
STAN3/07/036 43 ELECTRIC LIGHT FOR SEXTANT
STAN3/07/037 44 ACCESSARY PACKING FOR THEOD CASES
STAN3/07/038 45 18 INCH ALIDADE
STAN3/07/039 46 12 INCH ALIDADE
STAN3/07/040 47 14 INCH CHEMICAL THERMOMETERS
STAN3/07/041 49 31-60-107
STAN3/07/042 [54 5" Dividers Plain Chart]
STAN3/07/043 56 PLANIMETER SLIDING BAR
STAN3/07/044 57 UNIVERSAL PLANIMETER
STAN3/07/045 58 [Road Tracer (P840)]
STAN3/07/046 59 [Target "A"]
STAN3/07/047 60 [Pole Wagon (Otts PAT)]
STAN3/07/048 61 _ 1 to 14 PLANIMETERS, RADIAL (SQUARE ROOT TYPE)
STAN3/07/049 61 2A-2AV 2BD 2BE PLANIMETER, RADIAL (SQUARE ROOT TYPE)
STAN3/07/050 62 [Inverting Telescope for Sextants - H.5]
STAN3/07/051 [63] LENS GENERATOR MACHINE
STAN3/07/052 64 [100FT "Konstat" Steel Band P.1520]
STAN3/07/053 65 TESTER LINEN
STAN3/07/054 66 [Levelling Stave (U631)]
STAN3/07/055 67 No.2 DRAFTING MACHINE
STAN3/07/056 69 [Clamping "T" Square]
STAN3/07/057 70 [Beam Compass]
STAN3/07/058 71 [Sextant Reader]
STAN3/07/059 73 [Dividers, 6" Proportional]
STAN3/07/060 76 BUBBLE HOUSING RAISED CIRCULAR TYPE
STAN3/07/061 [7]8 SCOTCH STAVE
STAN3/07/062 79 SEXTANT 120E
STAN3/07/063 81 [Case for Thomson Azimuth]
STAN3/07/064 82 [Rule, Parallel Bar 6" - U2615]
STAN3/07/065 84 [Rule, Parallel Bar 9" - U2615]
STAN3/07/066 85[Aspray's Parallel Rule]
STAN3/07/067 86 [Perambulator YDS. (P1560)]
STAN3/07/068 [87] MINE TRANSIT, BRUNTON PATTERN
STAN3/07/069 88 STAR TELESCOPE FOR SEXTANT ACHRO INTERUPTER H12
STAN3/07/070 90 EIDOGRAPH 30INCH
STAN3/07/071 93 [POCKET MICROSCOPE]
STAN3/07/072 95 [Optical Square (Mirror Type)]
STAN3/07/073 96 [Tracing Eraser]
STAN3/07/074 100 INSULATED THERMOMETER
STAN3/07/075 101 MONOCLE FOR SEXTANT H14
STAN3/07/076 102 3INCH COMPASS READER
STAN3/07/077 104 18INCH PARALLEL ROLLING RULE
STAN3/07/078 105 LEVEL POCKET REFLECTING
STAN3/07/079 106 FILE [Allbrit Integrator No. 2]
STAN3/07/080 109 CASE, CARRYING FOR ADMIRALTY QUINTANT
STAN3/07/081 111 QUINTANT ADMIRALTY 6INCH MICRO
STAN3/07/082 112 BUBBLES STANDARD FITTINGS ARE DRGS 316
STAN3/07/083 113 [Sectioning Set Wood]
STAN3/07/084 114 RADIAL PLANIMETER
STAN3/07/085 115 POLE WAGON
STAN3/07/086 119 CODDINGTON HAND MAGNIFIER
STAN3/07/087 120 SELF CENTREING HEAD COMPASS
STAN3/07/088 122 BOAT BINNACLE 'MOBOC' PATT
STAN3/07/089 123 PLANIMETER RULE FORM U2349A
STAN3/07/090 124 LEVEL ABNEY (IMPORVED TELESCOPIC)
STAN3/07/091 124 LEVEL (ABNEY IMPROVED TELESCOPIC)
STAN3/07/092 125 LEVEL, TELESCOPE REFLECTING - U802
STAN3/07/093 126 EXPERIMENTAL NOT FOR PRINT ISSUES
STAN3/07/094 126 TRACINGS SEXTANT 130M (GA TRACING DRG No. 41813 FILED IN GABS CABINET)
STAN3/07/095 127 [Film Unit]
STAN3/07/096 128 STAND U605
STAN3/07/097 131 AZIMUTH MK V
STAN3/07/098 135 [36" Eidograph]
STAN3/07/099 136 FOR TRACINGS SEE 0700341 SINGLE STAR TELESCOPE H11
STAN3/07/100 137 [Rule, Parallel, 15" (Fields) U1186]
STAN3/07/101 139 [Tally Register]
STAN3/07/102 140 STANDARD CASE FITTINGS
STAN3/07/103 141 OPTICAL SQUARE (SINGLE TYPE)
STAN3/07/104 142 PLANIMETER SLIDING BAR (LARGE)
STAN3/07/105 145 MKII PILOT BALLON SLIDE RULE
STAN3/07/106 147 THERMOMETER (CROSSLEY)
STAN3/07/107 149 READER STANDARD SCREW
STAN3/07/108 150 EYEPIECE, STANDARD 45 ACHRO
STAN3/08 Tracings 151 - 300
STAN3/08/001 151 [G.S.378 Level (B.L.P. & Horizontal Circle)]
STAN3/08/002 152 BOATS AZIMUTH
STAN3/08/003 153 GIRTH STRAP (WEIGHT)
STAN3/08/004 156 CLOCK CASE (BUILT UP)
STAN3/08/005 157 SALINOMETER TESTING POT (FIXED HANDLE)
STAN3/08/006 158 BINNACLE AND COMPASS BOARD OF TRADE PATTERN
STAN3/08/007 159 SALINOMETER TESTING POT
STAN3/08/008 160 PARALLEL ATTACHMENT FOR DRAWING BOARDS
STAN3/08/009 161 THERMOMETERS E108, E108 REVOLVING SHUTTER, E109
STAN3/08/010 162 STANDARD SEXTANT CASE
STAN3/08/011 163 'STANLEY' DRAWING TABLE P3350
STAN3/08/012 164 BEER THERMO J AND E HALL
STAN3/08/013 165 STRAP AND PAD FOR S.R. STAND (LARGE)
STAN3/08/014 166 STAND CENTRING HEAD INDIA THREAD
STAN3/08/015 167 DIAPHRAGM STANDARD
STAN3/08/016 168 TOMMY PINS
STAN3/08/017 169 METAL EDGE FOR DRAWING BOARD
STAN3/08/018 170 WASHERS FOR THERMOMETERS
STAN3/08/019 171 RACK, CORRECT ANGLE
STAN3/08/020 172 THERMOMETER H284
STAN3/08/021 173 THERMOMETER H286
STAN3/08/022 174 CASE FOR U500 LEVEL
STAN3/08/023 175 DRAWING STAND (LARGE)
STAN3/08/024 176 LENS - MISCELANEOUS
STAN3/08/025 177 COMPASS
STAN3/08/026 178 THERMOMETER E11-13
STAN3/08/027 179 COLLIMATOR SEXTANT VERIFICATION
STAN3/08/028 180 Thermometer F117 E133 H58
STAN3/08/029 181 EYEPIECE
STAN3/08/030 182 LENS GENERATOR
STAN3/08/031 183 PANTOGRAPH 30 INS AND SOME OTHER SIZES ON GA CODE
STAN3/08/032 184 PANTOGRAPHS LARGE SIZES GA IS A DRG NO 183
STAN3/08/033 185 CASTINGS FOR GS2 LEVEL
STAN3/08/034 186 PLANIMETER, WINGED HANDLE
STAN3/08/035 187 THERMOMETER H209
STAN3/08/036 188 THEODOLITE GD
STAN3/08/037 189 PLUMBING APPARATUS
STAN3/08/038 190 AZIMUTH REVOLVING RING 8" CARD U1285
STAN3/08/039 190 EXPERIMENTAL
STAN3/08/040 191 THERMOMETER H31
STAN3/08/041 192 [4 1/2" Eltham Theodolite]
STAN3/08/042 193 STATION POINTER PATTERN 5543
STAN3/08/043 195 PANTAGRAPH 36 INCH
STAN3/08/044 196 30 INCH ALIDADE, METAL, FOR UGANDA
STAN3/08/045 197 12 INCH CIRCULAR PROTRACTOR
STAN3/08/046 201 [Sextant (Stanley Sounding Patt)]
STAN3/08/047 203 [Barometer (Kew Patt)]
STAN3/08/048 204 TIDE INDICATOR, LENTHAL BAUGH PATT
STAN3/08/049 205 ALLBRIT INTEGRATOR NO 2
STAN3/08/050 206 GS 378 LEVEL (DRG NO 151) CASTINGS ONLY
STAN3/08/051 208 SCALE DIAGONAL 1 METRE
STAN3/08/052 209 12 INCH ENGINEERS LEVELS
STAN3/08/053 210 TEST SCALE
STAN3/08/054 211 BRINOMETER
STAN3/08/055 212 PLANIMETER MAG
STAN3/08/056 213 MORTON AZIMUTH
STAN3/08/057 218 (REDESIGN IN BACK OF FOLDER NOT TO BE ISSUED) BLUE LINEN PARTS 1, 2 ,3 ARE FOR LEVEL GS378 WITH WALLPLATE AND CIRCLE AND ARE OK FOR ISSUING
STAN3/08/058 216 [Compass, Mag, Trough U1136]
STAN3/08/059 219 GS378 LEVEL (DRG NO 151) WITH BALL JOINT WITH[OUT] CIRCLE
STAN3/08/060 [220 Compass, Boxwood, Trough 4" - U1134]
STAN3/08/061 222 [Plumbing Bar]
STAN3/08/062 223 SEXTANT DELUXE
STAN3/08/063 224 14 INCH ENGINEERS LEVEL OVERCASE AND BUBBLE CASE
STAN3/08/064 226 DIAGONAL EYE PIECE
STAN3/08/065 227 COMPASS 3 INCH SPECIAL FOR BERGIUS & CO LTD
STAN3/08/066 228 DRAWING INSTRUMENTS HALF SET BE PATT
STAN3/08/067 229 PROTRACTOR (SPECIAL FOR EME CHILSEHURST)
STAN3/08/068 230 FULLERS CALCULATOR
STAN3/08/069 231 HELMHOLTZ COIL
STAN3/08/070 232 DIALTHERMO
STAN3/08/071 233 TELESCOPE, SEXTANT (WHITE & CO PATT)
STAN3/08/072 234 DRAFTING MACHINE NO 1 LEFT HAND
STAN3/08/073 235 CHART BOARD (ADM; PATT)
STAN3/08/074 [236 Stand, Fixed Head (India Thread)]
STAN3/08/075 237 7 INCH CHART DIVIDERS SINGLE HAND
STAN3/08/076 238 7 INCH CHART DIVIDERS ORDINARY
STAN3/08/077 239 STATION POINTER ADMIRALTY PATT H55
STAN3/08/078 240 RULES PLANIMETER CHECKING
STAN3/08/079 241 COMPASS CARD READER 5 INCH
STAN3/08/080 244 BINNACLE READER 'DA-NYT' MARK
STAN3/08/081 245 DRAWING AD T SQAURE (SPECIAL FOR MWT)
STAN3/08/082 246 LEVEL ENGINEERS (10 INCH PRECISION)
STAN3/08/083 248 FRAMED STAND
STAN3/08/084 249 LAMP (SPRING BALANCED FOR D/M NO 1)
STAN3/08/085 250 ALIDADE (BEAMAN ARC FITTING)
STAN3/08/086 251 SEXTANT (NUBEL PATTERN)
STAN3/08/087 252 ALIDADE (TELESCOPIC) OPTICAL
STAN3/08/088 253 PANTOGRAPH
STAN3/08/089 254 DRAFT M/C CIVIL ENGINEER PATTERN
STAN3/08/090 255 CO-ORDINATOR
STAN3/08/091 256 ALIDADE, SIMPLE PATT (U1100)
STAN3/08/092 [257 Sextant MK VI M]
STAN3/08/093 257 OLD PRINTS ONLY PRINTS OF SEXTANT MK VI M
STAN3/08/094 258 TELESCOPE SEXTANT COMMON INVERTED H7
STAN3/08/095 259 HYDROMETER H554
STAN3/08/096 260 SALINOMWRWE H630
STAN3/08/097 261 INTERGRATOR NO 2 ALLBRIT
STAN3/08/098 262 COMPASS DRY CARD MARK 1
STAN3/08/099 263 DRAWING STAND ADJUSTABLE COUNTER-BALANCE WEIGHT
STAN3/08/100 265 5 INCH DIVIDERS
STAN3/08/101 266 DRAFTING MACHINE
STAN3/08/102 267 [Theodolite 4 1/2" - Eltham Patt]
STAN3/08/104 267 1GA - 50
STAN3/08/105 268 THERMOMETER (FALT CASE PIPE) E199
STAN3/08/106 269 PLANIMETER, CONTINUOUS CHART (SMALL TYPE) U2340A
STAN3/08/107 272 THERMOMETER (FLAT CASE PIPE) 4 1/8 INCH CASE
STAN3/08/108 273 THERMOMETER (FLAT CASE PIPE) 5 1/2 INCH CASE 6 1/2 INCH TAILPIECE
STAN3/08/109 274 THERMOMETER (FLAT CASE) PIPE 8 INCH CASE
STAN3/08/110 275 THERMOMETER (FLAT CASE PIPE) 5 1/5 INCH CASE 7 7/8 INCH TAILPIECE
STAN3/08/111 276 THERMOMETER FLAT CASE PIPE 8 1/4 INCH CASE 6 1/2 INCH TAILPIECE
STAN3/08/112 277 THERMOMETER (FLAT CASE PIPE) 8 1/4 INCH CASE 8 1/2 INCH TAIL PIECE
STAN3/08/113 278 THERMOMETER (ANGLE TYPE) 5 1/2 INCH CASE
STAN3/08/114 279 THERMOMETER (ANGLE TYPE) 8 1/4 INCH CASE
STAN3/08/115 280 STAND FOR PRISMATIC COMPASS
STAN3/08/116 281 ALIDADE 20 INCH DETACHABLE SIGHTS U1113
STAN3/08/117 282 BATTERY CASE FOR SEXTANTS
STAN3/08/118 282 HYPSOMETER BRANDIS PATTERN
STAN3/08/119 284 MAGNIFIER PLANIMETER HAND
STAN3/08/120 286 READER PRISMATIC FOR BUBBLES
STAN3/08/121 287 CASE FOR GS378 LEVEL WITH BALL JOINT
STAN3/08/122 288 COMPASS PRISMATIC TROUGH
STAN3/08/123 289 THERMOMETER E114
STAN3/08/124 291 LEVEL U500 BUILDERS
STAN3/08/125 292 LEVEL 12 INCH ENGINEERS
STAN3/08/126 293 BAROMETER B.O.T. PATTERN
STAN3/08/127 294 THEODOLITE CONTRACTORS PATTERN
STAN3/08/128 295 15 INCH PARALLEL ROLLING RULE
STAN3/08/129 296 24 INCH PARALLEL ROLLING RULE (TUFNOL)
STAN3/08/130 297 12 INCH PARALLEL ROLLING RULE
STAN3/08/131 298 NUBEL SEXTANT (SPRING PACKING)
STAN3/08/132 299 GS2 THEODOLITE
STAN3/08/133 299 GS2 THEODOLITE
STAN3/09 Tracings 300 - 420
STAN3/09/01 TRACINGS 300 - 419 DO SPECS
STAN3/09/02 [Reference Prints]
STAN3/09/03 HAYWOODS MICRO FILMED DRAWING NUMBERS RECORD
STAN3/09/04 [Haywood Drgs]
STAN3/09/05 300 DRAFTING M/C RAIL TYPE 8100
STAN3/09/06 301 BINNACLE MK X M.N.
STAN3/09/07 302 PROTRACTOR CELLULOID PLOTTING
STAN3/09/08 304 THEODILITE 4 1/2INCH ELTHAM MICRO
STAN3/09/09 305 12 INCH ENGINEER'S LEVEL CASE
STAN3/09/10 306 CASE FOR GS2 THEODILITE
STAN3/09/11 308 LEVEL INDIA PATTERN TRIBRACH DETAILS ONLY
STAN3/09/12 309 LEVEL STANLEY 9 INCH DUMPY
STAN3/09/13 310 STAND PLANETABLE U1080
STAN3/09/14 311 DIAPHRAGM, EXTRACTOR
STAN3/09/15 312 E27 THERMOMETER
STAN3/09/16 313 PROTRACTOR CELLULOID P1939
STAN3/09/17 314 STAFF 10 FEET FOLDING SOPWITH PATTERN
STAN3/09/18 315 PLUMMET 1/2LB
STAN3/09/19 316 BUBBLE FITTINGS, STANDARD
STAN3/09/20 317 THERMOMETER CASE (FOUNTAIN PEN TYPE) E43
STAN3/09/21 318 RULE PARALLEL 6 INCH U2619 U2623
STAN3/09/22 319 PLANIMETER (SPECIAL FOR EVERETT AND EDGECUMBE)
STAN3/09/23 320 PLANIMETER CONTINUOUS CHART U2341
STAN3/09/24 321 STD HARRI BINNACLE (STANDARD)
STAN3/09/25 322 CASE 8 INCH PROTRACTOR
STAN3/09/26 323 COMPASS TUBULAR PATTERN
STAN3/09/27 324 BINNACLE MK III WL
STAN3/09/28 324 EXPERIMENTAL MAR
STAN3/09/29 325 SIDE BUBBLE FOR 12 INCH ENGINEER'S LEVEL
STAN3/09/30 326 PERAMBULATOR YARDS OR METRES
STAN3/09/31 327 THERMOMETER 6 INCH DIAL
STAN3/09/32 328 THERMOMETER 4 INCH DIAL
STAN3/09/33 329 THERMOMETER 3 INCH DIAL
STAN3/09/34 330 RULE PARALLEL ROLLING 30 INCH U2623
STAN3/09/35 331 RULE PARALLEL ROLLING 36 INCH U2623
STAN3/09/36 332 ROAD TRACER P842
STAN3/09/37 333 AZIMUTH 6IN THOMPSON (NARROW BASE)
STAN3/09/38 334 THOMPSON AZIMUTH 7INCH (NARROW BASE)
STAN3/09/39 336 AZIMUTH 9 INCH THOMPSON (NARROW BASE)
STAN3/09/40 337 AZIMUTH 10 INCH THOMPSON NARROW (CASE)
STAN3/09/41 338 BAROMETER MK II (LAGLESS ANEROID PATT)
STAN3/09/42 339 BINNACLE HARRI STEERING PATTERN
STAN3/09/43 340 AZIMUTH THOMPSON 6 INCH BROAD BASE
STAN3/09/44 342 AZIMUTH 8 INCH THOMPSON (BROAD BASE)
STAN3/09/45 344 [Azimuth, Thompson 10", Broad - Case]
STAN3/09/46 345 STETHESCOPE, WATER
STAN3/09/47 346 [Base Plate for Staff]
STAN3/09/48 347 BINNACLE FIG 780 (PILLAR TYPE)
STAN3/09/49 348 LAMP NO.4 OIL (FOR BINNACLES)
STAN3/09/50 349 BINOCULAR, STAR (15 LIGNE)
STAN3/09/51 350 STAND (U1081)
STAN3/09/52 351 GRADIENT METER (VAN PUTTENS)
STAN3/09/53 352 STAND TUMBLE OVERHEAD
STAN3/09/54 353 CASE FOR CROSS STAFF
STAN3/09/55 354 BINNACLE SMITHSON
STAN3/09/56 335 AZIMUTH THOMPSON 8 INCH NARROW BASE
STAN3/09/57 358 THERMOMETER, VAPOUR PRESSURE, DISTANT READING
STAN3/09/58 359 THERMO H72 24 INCH TAILPIECE
STAN3/09/59 360 THERMOMETER H82
STAN3/09/60 361 POLE RANGING 6 FEET
STAN3/09/61 366 GOV'R'M DR'W'GS CLINO'S INDIAN MK VI (PRINTS ONLY)
STAN3/09/62 366 CLINOMETER (INDIAN MK IV PATTERN) U1138
STAN3/09/63 367 THERMOMETER E112
STAN3/09/64 369 COMPASS FIG 301 No 7 (8 INCH CARD)
STAN3/09/65 370 COMPASS FIG 301 NO.8 6 INCH CARD
STAN3/09/66 372 THERMOMETERS SCHDULE A, B, O + P
STAN3/09/67 375 CROSS STAFF FRENCH PATTERN
STAN3/09/68 376 LAMP NO.5 OIL (FOR BINNACLES)
STAN3/09/69 377 BINNACLE MK III SL
STAN3/09/70 378 COMPASS FIG 301 NO.10 (4IN OR 4 1/2 CARD)
STAN3/09/71 380 COMPASS (FIG 301) 4" CARD NO.12
STAN3/09/72 382 EYEPIECE 5 RAMSDEN TYPE
STAN3/09/73 383 READER APLANATIC
STAN3/09/74 385 SPRING BOWS PENCIL
STAN3/09/75 386 SOUNDING WINCH
STAN3/09/76 387 THERMOMETER H242
STAN3/09/77 388 LIGHT ELECTRIC FOR SEXTANTS
STAN3/09/78 389 THERMOMETER SPEAR H207
STAN3/09/79 393 CLINOMETER BINNACLE HARRI PATTERN
STAN3/09/80 396 CLINOMETER BROWNS STABILITY
STAN3/09/81 399 COMPASS 302G
STAN3/09/82 401 STAND AND PLANETABLE U1089-90
STAN3/09/83 402 COMPASS READER ADJUSTABLE 4 INCH
STAN3/09/84 403 COMPASS READER (ADJUSTABLE) 5 INCH
STAN3/09/85 404 PLANIMETER SLIDING BAR (TRACER LENS)
STAN3/09/86 405 CASE FOR ALIDADE SIMPLE PATTERN
STAN3/09/87 406 PLANIMETER FIXED ARM RULE U2350A
STAN3/09/88 408 THERMOMETER, SPEAR F2010 (E47)
STAN3/09/89 409 THERMOMETER, BOXWOOD E56
STAN3/09/90 414 LEVEL DETACHABLE FOR STAVES U683
STAN3/09/91 415 STAND LIGHT FORM U603
STAN3/09/92 416 THERMOMETER, SPEAR E53
STAN3/09/93 417 PRISM, CAP U249
STAN3/09/94 418 LEVEL FOLDING STAFF U682
STAN3/09/95 419 STAND U602
STAN3/10 Tracings 420 - 531
STAN3/10/01 420 PLANIMETER, FIXED ARM MK II
STAN3/10/02 [Bubble Artifical Horizon]
STAN3/10/03 OPTICAL DIVIDING HEAD
STAN3/10/04 421 LAMP No 6 OIL (FOR BINNACLES)
STAN3/10/05 [422 Planimeter (Precision Disc)]
STAN3/10/06 423 SEXTANT (SESTRAL)
STAN3/10/07 425 [Sextant, 4" Box]
STAN3/10/08 427 SEXTANT, TRANSOT CASE
STAN3/10/09 428 SEXTANT, TRANSIT CASE
STAN3/10/10 429 CASE FOR RAILWAY CURVES
STAN3/10/11 430 SEXTANT STAND DETAILS
STAN3/10/12 431 THERMOMETER SCHEDULE F SEE NEW DRAWINGS 71076
STAN3/10/13 432 PANTOGRAPH 48 INCH
STAN3/10/14 434 PLUMMET 1LB
STAN3/10/15 435 PLUMMET 2 LBS
STAN3/10/16 436 THERMOMETER, FLAT CASE (64/2)
STAN3/10/17 437 INTERGRATOR No 3 ALLBRIT
STAN3/10/18 438 INTEGRAPH - MARTIN BAKER PATT.
STAN3/10/19 438 INTEGRAPH, U2361
STAN3/10/20 438 INTEGRAPH U.2361
STAN3/10/21 439 MINING OUTFIT
STAN3/10/22 440 [Plummet, 5LBs]
STAN3/10/23 441 PANTOGRAPH SUSPENSION 38 INCH
STAN3/10/24 441/-60 PANTAGRAPH 38INCH SUSPENSION
STAN3/10/25 441/61- PANTOGRAPH 38IN SUSPENSION
STAN3/10/26 442 CASE No 1 INTEGRAPH
STAN3/10/27 443 DIAL, HEDLEY MINING
STAN3/10/28 444 DRAFTING M/C HEAD CE PATTERN
STAN3/10/29 445 LEVEL 7INCH ABNEY
STAN3/10/30 446 LEVEL, STRIDING
STAN3/10/31 452
STAN3/10/32 453 DIAGONAL ERECTING EYEPIECE
STAN3/10/33 454 DIVIDERS 9INCH PROPORTIONAL
STAN3/10/34 455 ASTROLOBE
STAN3/10/35 456 SPRING BOWS, PEN
STAN3/10/36 457 SPRING BOWS, DIVIDERS
STAN3/10/37 458 THERMOMETER POCKETS
STAN3/10/38 459 COURSE TO STEER 0 - 360
STAN3/10/39 460 PEN, DRAWING (HINGED NIB) U2033 - U2034
STAN3/10/40 461 PRISM FOR LUCIADA CAMERA
STAN3/10/41 462 THEODOLITE ELTHAM COMPASS PATT
STAN3/10/42 464 DRAFTING MACHINE CLAMP ANCHOR
STAN3/10/43 465 DRAFTING MACHINE CORNER ANCHOR
STAN3/10/44 466 PLANIMETER ROLLING DISC
STAN3/10/45 468 FILE
STAN3/10/46 468 OPTICAL THEOD CASTING TRACINGS
STAN3/10/47 468 0302000 - 0302600
STAN3/10/48 468 0302601 - 0303025 070098 - 0701025
STAN3/10/49 468 OPT THEODOLITE GA AND SAs AND 5 FIGURE PARTS
STAN3/10/50 468 100-200
STAN3/10/51 472 HARMONIC ANALYSER
STAN3/10/52 473 DRAFTING MACHINE (SMALL RAIL TYPE)
STAN3/10/53 474 LEVEL, RAPID SETTING
STAN3/10/54 476 STAND JOHNSON HEAD
STAN3/10/55 477 PANTOGRAPH, 34INCH SUSPENSION
STAN3/10/56 478 PANTOGRAPH 28 INCH SUSPENSION
STAN3/10/57 479 PANTOGRAPH 24 INCH SUSPENSION
STAN3/10/58 480 DOWS STANLEYS IMPROVED PATT U2020
STAN3/10/59 481 PANTOGRAPH SUSPENSION
STAN3/10/60 482 PANTOGRAPH, SUSPENSION, CLAMP FOOT
STAN3/10/61 483 SHARPENER FOR PANTOGRAPH PENCIL
STAN3/10/62 485 PRINTS
STAN3/10/63 485
STAN3/10/64 485 IN 34000 NUMBERs REVOLABLE LEVEL
STAN3/10/65 485 0302790 - 0303270 AND 0700989 - 0707090 REVOLVABLE LEVEL
STAN3/10/66 486 EYEPIECE DIAGONAL U247
STAN3/10/67 487 PLANIMETER, DRAFTING MACHINE
STAN3/10/68 488 DRAFTING MACHINE, NO 2 U3405/A
STAN3/10/69 489 PLANIMETER RULE FORM SQUARE ROOT Q100
STAN3/10/70 490 BAROGRAPH
STAN3/10/71 492 THERMOGRAPH
STAN3/10/72 493 PLANIMETER, CONTINUOUS CHART, LARGE TYPE U2340
STAN3/10/73 494 THEODLITE, CONTRACTORS, 4 SCREW
STAN3/10/74 495 LEVEL U500 4 SCREW
STAN3/10/75 496 APOMECOMETER U1946
STAN3/10/76 498 SEXTANT, REPLACEMENT SPRINGS
STAN3/10/77 499 MONOCLE FOR 24M SEXTANT
STAN3/10/78 501 TILTING RAIN GUAGE
STAN3/10/79 503 THERMOMETER E57
STAN3/10/80 504 THEODOLITE CANADIAN PATTERN
STAN3/10/81 505 TRACING AND PRINTS OF 24M SEXTANT
STAN3/10/82 508 STAND U604
STAN3/10/83 510 AZIMUTH 'HARRI' TYPE
STAN3/10/84 512 COMPASS FIG 301 NO.9 5 INCH CARD
STAN3/10/85 513 [Special Collimator]
STAN3/10/86 515 [Hoffmann Head]
STAN3/10/87 516 [Cathetometer]
STAN3/10/88 519 [Beam Compasses (24" Divided Patt)]
STAN3/10/89 521 [Gauge, Evaporation Hook]
STAN3/10/90 522 COURSE TO STEER BOX
STAN3/10/91 524 [Weight, Paper - U2611]
STAN3/10/92 525 [Binnacle, Mk III, S.D.]
STAN3/10/93 526 [Binnacle, Mk X, M.N., Steering]
STAN3/10/94 528 [Telescope, High Power Draw - H8]
STAN3/10/95 529 [Telescope, Inverting High Power Draw - H6]
STAN3/10/96 530 [Harmonic Analyser No 1]
STAN3/10/97 531 [Sun Glass - U.242]
STAN3/11 Tracings 532 to 655
STAN3/11/01 SKID TESTER OLD DRAWINGS
STAN3/11/02 533 (618 TRACINGS)
STAN3/11/03 533 TAXIMETER ARGENTINE
STAN3/11/04 535 COMPASS FIG 301 No 7/3 8 INCH CARD NEEDLE BEARING TYPE
STAN3/11/05 539 INTERGRAPH RAILTYPE
STAN3/11/06 534 PLANIMETER RULE FORM SQUARE ROOT TYPE U2351C
STAN3/11/07 536 COMPASS 301 No 7 NEEDLE BEARING TYPE
STAN3/11/08 537 LEVEL CIRCULAR U1140
STAN3/11/09 541 DRAFTING MACHINE 84 INCH X 44 INCH BOARD
STAN3/11/10 542 ALIDADE BEAMAN ARC PATT
STAN3/11/11 544
STAN3/11/12 545 INTERGRATOR NO 4
STAN3/11/13 547 SCALE, DIAGONAL 36 INCH
STAN3/11/14 548 LEVEL 12 INCH ENGINEERS 4 SCREW (SPECIAL FOR HS CRABTREE)
STAN3/11/15 550
STAN3/11/16 551
STAN3/11/17 552 STAND FOR BEARING REPEATER
STAN3/11/18 554 PLANIMETER CONTINUOUS CHART U2340C
STAN3/11/19 555 DRG No 555 STD SCREWS NUTS AND WASHERS BA AND SPECIALS
STAN3/11/20 556 SURVEYORS ROD U1760
STAN3/11/21 557 PLUMMET 6 OZS U375
STAN3/11/22 558 COMPASS FOR PLANETABLE U1137
STAN3/11/23 560 SURVEYORS STAFF LIGHT ALLOY 14FT
STAN3/11/24 561 OPISOMETER U2775
STAN3/11/25 562 MONOCLE FOR ADMIRALITY QUINTANT
STAN3/11/26 563 BRASS WORK FOR PRINTING FRAMES
STAN3/11/27 564 BUBBLE U551-2-3
STAN3/11/28 565 FOR REPAIRS ONLY
STAN3/11/29 566 STANDS PRISMATIC COMPASS U1421 + 2 (U609)
STAN3/11/30 570
STAN3/11/31 572 GUNTER SCALES 60 INCH
STAN3/11/32 573 LEVEL 7 INCH ABNEY SERVICE PATTERN
STAN3/11/33 574
STAN3/11/34 575 BINNACLE FIG 78 (7 INCH) BASE RING CASTING PATTERN NO 1126 ONLY
STAN3/11/35 577 STAND CRUTCH FORM
STAN3/11/39 580 STRIDING LEVEL, OPTICAL THEODOLITE
STAN3/11/40 582 REDESIGN ELECTRIC LIGHT FITTING OPT THEO
STAN3/11/41 582 LIGHT FITTINGS OPT; THEO; SEE REDESIGN FILE DRG NO 582
STAN3/11/42 583
STAN3/11/43 585
STAN3/11/44 586 STATION POINTER PATT, 5561 (8 INCH CIRCLE)
STAN3/11/45 588
STAN3/11/46 590 CARRIAGE ATTACHMENT FOR PLANIMETER
STAN3/11/47 592 FITTING OF HEELING COILS IN COMMERCIAL BINNACLES COIL PATT 925B
STAN3/11/48 594 STAND U604
STAN3/11/49 597 STAND SLIDING LEG
STAN3/11/50 599
STAN3/11/51 603 PLUMMET 8 OZS
STAN3/11/52 605 COLLIMATOR FOR LABORATORY
STAN3/11/53 606 THEODOLITE OPTICAL SCALE S1
STAN3/11/54 607 SURVEYORS 9 FOOT LIGHT ALLOY STAFF
STAN3/11/55 608 STAFF FACINGS
STAN3/11/56 609 [SURVEYORS' STAFF, LIGHT ALLOY, 16FT]
STAN3/11/57 611 THERMOMETER MARKED UP PRINTS SPECIAL FOR HORIZONTAL DIAL
STAN3/11/58 612 COMPASS, DORY, 3 INCH CARD NO TRACINGS
STAN3/11/59 [613 AZIMUTH BROWN'S PATT]
STAN3/11/60 613 AZIMUTH BROWNS MN PATT PRINTS
STAN3/11/61 614 SOUNDING INSTRUMENT, WIGZELLS PATTERN
STAN3/11/62 615 PLANIMETER, RULE FORM U2351F
STAN3/11/63 616 HARRI SEXTANT CONVERSION
STAN3/11/64 619 PLANIMETER RULE FORM (SQ ROOT TYPE) (U2351E)
STAN3/11/65 620 LEVEL GRADIENT U960
STAN3/11/66 621
STAN3/11/67 622 SURVEYORS STAFF LIGHT ALLOY 3 METRE
STAN3/11/68 623
STAN3/11/69 624 HARMONIC ANALYSER (CASE)
STAN3/11/70 625 PRINTS OF M.C.I. SEXTANT
STAN3/11/71 625
STAN3/11/72 626 LIGHT ALLOY 18 FOOT STAFF
STAN3/11/73 629 SURVEYOR'S LIGHT ALLOY 7FT 3IN STAFF
STAN3/11/74 630 PLANIMETER CORADI (PAMPHLETS ONLY)
STAN3/11/75 633 DRAWINGS PEN SWIVEL NIB
STAN3/11/76 634 ELLIPTIC TRAMMELS SKETCHES ONLY
STAN3/11/77 636 CLINOMETER SIMPLE INDIA PATTERN
STAN3/11/78 637 6 INCH AND 12 INCH CELLULOID EDGE SCALES (KEY)
STAN3/11/79 638 DRAFT M/C NO 1 REDESIGN A4000 DRAWINGS NOT REQUIRED ON FLOWLINE, AND REDRAWN AND RENUMBED OF THOSE REQUIRED
STAN3/11/80 639 CASE 5 INCH CLOCK
STAN3/11/81 640 CASE 5 INCH ANEROID
STAN3/11/82 641 PLANIMETER U8301 U2351
STAN3/11/83 642
STAN3/11/84 643 DRAFTING M/C LARGE
STAN3/11/85 644 FULLER - BAKEWELL CALCULATOR
STAN3/11/86 645 DRAFTING M/C NO 2 A4020
STAN3/11/87 646 7 INCH MAX CLINOMETER TOP GLASS ONLY FOR OTHER DETAILS SEE DRG NO 41610
STAN3/11/88 647 SHORT FOCUSSING LENS U250
STAN3/11/89 648 THEODOLITE OPTICAL SCALE S2 (PROTOTYPE)
STAN3/11/90 649
STAN3/11/91 650 0.3 EYEPIECE
STAN3/11/92 651 CROSS STAFF U1541
STAN3/11/93 652 360° HEAD 1ST PROTOTYPE
STAN3/11/94 653 TRAVERSE EQUIPMENT FOR THEODOLITE AND BAND SYSTEM
STAN3/11/95 654 KELVIN-HUGHES 'CHALLENGER' SURVEY SEXTANT
STAN3/11/96 654 SURVEY SEXTANT MKIII
STAN3/11/97 655 TECH DATA POPULAR LEVEL
STAN3/11/98 655 POPULAR LEVEL
STAN3/12 Tracings 656 to 684
STAN3/12/01 656 PARALLEL MOTION DRAFT M/C
STAN3/12/02 657 STAFF POPULAR LEVEL
STAN3/12/03 656 OPTICAL THEOD COSTING INVESTIGATIONS
STAN3/12/04 658 RAILWAY CURVES
STAN3/12/05 659
STAN3/12/06 660 POLARIMETER
STAN3/12/07 660 POLARIMETER
STAN3/12/08 662 DRAFT M/C PARALLEL MOTION ANTIQUARIAN
STAN3/12/09 664 ANCHOR LEVEL FOR NO 2 DRAFTING MACHINE REDESIGN LARGE
STAN3/12/10 665 ALLBRIT DRAFTING UNIT
STAN3/12/11 666 DRAWING BOARD STAND FOR REF TABLE
STAN3/12/12 667 RAILTYPE DRAFTING M/C
STAN3/12/13 668 DEMONSTRATION VERNIER SCALE
STAN3/12/14 669 ADJUSTABLE STAND FOR RAIL TYPE DRAFTING MACHINE
STAN3/12/15 670 REFERENCE BINNACLE
STAN3/12/16 671 REFLECTOR BINNACLE 671/EX1 ONLY
STAN3/12/17 672 6 1/2" CARD RELECTOR COMPASS (UP TO DATE DRAWINGS)
STAN3/12/18 672 CANCELLED DRAWING AND UNIT SPEC
STAN3/12/19 674 ELECTRONIC PLANIMETER FOR AUTOMATIC READING
STAN3/12/20 675 SPERRY HEATH PILOT COMPASS
STAN3/12/21 673 COMPASS PRISMATIC TROUGH FOR OPTICAL THEODOLITE
STAN3/12/22 676
STAN3/12/23 678 VAX RECORDER
STAN3/12/24 678
STAN3/12/25 678 VAX RECORDER
STAN3/12/26 678 VAX RECORDER
STAN3/12/27 678 VAX RECORDER
STAN3/12/28 VAX 1B MODS CONVERTING TO SINGLE TRACE INSTRUMENT
STAN3/12/29 678 VAX RECORDER
STAN3/12/30 678
STAN3/12/31 678 VAX RECORDER
STAN3/12/32 679 SKID TESTER LATEST DRAWINGS
STAN3/12/33 680 AUTO LEVEL
STAN3/12/34 681 PHOTOGRAPH NEGATIVES VARIOUS
STAN3/12/35 682 PARALLEL MOTION D/MC WOODEN RULE
STAN3/12/36 683 PLANIMETER FIXED ARM (SPECIAL FOR MESSRS SHANDON SCIENTIFIC COMPANY)
STAN3/12/38 684 CAMERA UNIT
STAN3/13 Tracings 685 to 744
STAN3/13/01 685 COMPASS REFLECTOR BINNACLE
STAN3/13/02 686 THEODOLITE ELTHAM PATTERN
STAN3/13/03 687 TELESCOPIC METAL SURVEYORS STAFF PROTOTYPE
STAN3/13/04 687 TRACINGS TELESCOPIC METAL STAFF
STAN3/13/05 687 LIGHT ALLOY TELESCOPIC METAL STAFF SURVEYORS DEVELOPMENT DRGS
STAN3/13/06 688 OPTICAL PLUMMET
STAN3/13/07 689 STAR GLOBES FOR SMITHSONIAN INSTITUTE U.S.A.
STAN3/13/08 690 ADAPTOR FOR BARLOW LENS FOR ASTRONOMICAL TELESCOPE
STAN3/13/09 691 TEST RIG FOR PHOTO ELECTRIC TRANSISTOR
STAN3/13/10 692 PRISM EYE-CAP OPTICAL THEODOLITE
STAN3/13/11 693 METER RATING TEST TANK (JOHN BROWN)
STAN3/13/12 694 PLOTTER CO-ORDINATE (MASONS)
STAN3/13/13 696 PLANIMETER A8365
STAN3/13/14 697 LEVEL FS 4 FEET MK IV
STAN3/13/15 698
STAN3/13/16 698 MINING DIAL
STAN3/13/17 699 CASE (6 INCH CLOCK) FRONT FLANGE
STAN3/13/18 700 ETC (INDEX INSIDE)
STAN3/13/19 701
STAN3/13/20 701 TYPE LAYOUT APARATUS
STAN3/13/21 702 HARMONIC SYNTHESISER
STAN3/13/22 704 LA SURVEYORS STAFF 4 PIECE MARKED UP PRINTS ONLY
STAN3/13/23 705
STAN3/13/24 706 BUBBLE ARTIFICIAL HORIZON
STAN3/13/25 707 BOWLING ALLEY LEVEL
STAN3/13/26 708 COMPLEX NUMBER SLIDE RULE
STAN3/13/27 709 PLANIMETER FOR REED BOARD CO
STAN3/13/28 710 STAFF LIGHT ALLOY LCC PATTERN
STAN3/13/29 711 (PROTOTYPE DRGS)
STAN3/13/30 711 1 - 50 TRACINGS
STAN3/13/31 711 50 - TRACINGS
STAN3/13/32 712 ALLBRIT "SPACEMASTER" (LARGE)
STAN3/13/33 712 ALLBRIT SPACEMASTER MK II (LARGE)
STAN3/13/34 713 REFLECTOR BINNACLE, REAR VIEW
STAN3/13/35 714 PROJECTOR ATTACHMENT 35MM SPACIAL
STAN3/13/36 715 PROJECTOR ATTACHMENT "CINE"
STAN3/13/37 716 PROJECTOR ATTACHMENT 'SIDERAL'
STAN3/13/38 717 CAMERA SPACIAL SCREEN SIZE A MK II
STAN3/13/39 718 CAMERA SPACIAL SCREEN SIZE B MK
STAN3/13/40 719 CAMERA SPACIAL TYPE B OPTICAL ATTACHMENT
STAN3/13/41 720 STAND SITE'R LEVEL
STAN3/13/42 721 ALIGNMENT TELESCOPE COSSOR MK II
STAN3/13/43 722 RECONNAISSANCE COMPASS
STAN3/13/44 PRECISION DISC PLANI DRG TRACINGS
STAN3/13/45 724 AZIMUTH BROWNS PATT
STAN3/13/46 725 YACHT COMPASS
STAN3/13/47 726 SITEMASTER LEVEL TRACINGS
STAN3/13/48 727 + 728 SPACIAL CINE SPECIAL MK III
STAN3/13/49 729 360° DRAFTING M/C HEAD
STAN3/13/50 730 SPACEMASTER III DRAFT M/C PTS 1 - 50
STAN3/13/51 730 - PTs LISTS GA -SAs
STAN3/13/52 730 DRAFT M/C SPACEMASTER III
STAN3/13/53 741
STAN3/13/54 744 BOX FOR MEASURING MAGNIFIER
STAN3/13/55 [Untitled]
STAN3/13/56 SMITHS CLOCK
STAN3/13/57 UNIDENTIFIED 29-11-66
STAN3/13/58 UNIDENTIFIED DRAFT COPIES
STAN3/14 H H P Tracings 2000 to 2104
STAN3/14/01 MISC FOLDER INDEX
STAN3/14/02 MISC 1 - 50 SEE INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/03 MISC 51 - 100 SEE INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/04 MISC 101 - 150 SEE INDEX FOR INSTRUMENT OR PART NAME EXCEPT 144, 145, 147 SEE SEPERATE FOLDER
STAN3/14/05 140 REDUNDANT TRACINGS - NOT TO BE DESTROYED
STAN3/14/06 MISC 147 OPTICAL SPEC SEXTANTS
STAN3/14/07 MISC 151 - 200 SEE INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/08 MISC 201 TO 225 SEE INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/09 MISC 258 ALIGNMENT TELESCOPE FOR COSSOR RADAR LTD
STAN3/14/10 MISC 226 - 250 SEE INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/11 MISC 251 - 275 (SEE SEPERATE FOLDER FOR 250) SEE ALSO INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/12 MISC 276 - 300 (SEE SEPERATE FOLDER FOR 276 AND 297) SEE ALSO INDEX FOLDER FOR INSTRUMENT OR PART NAME
STAN3/14/13 MISC 276 SPECIAL SLIDE RULE FOR WEST END ENGRAVING CO LTD
STAN3/14/14 MISC 297 MAP ROLLER
STAN3/14/15 MISC 301 - 325 (SEE SEPERATE FOLDER FOR MISC 322) SEE INDEX FOR INSTRUMENT OR PART NAME
STAN3/14/16 STAFF ATTENDANCE RECORD SHEET TRACINGS
STAN3/14/17 MISC 312 ALIGNMENT TELESCOPE
STAN3/14/18 MISC 322 (SPECIAL SPACEMASTER FOR MICROSCOPE UNIT)
STAN3/14/19 MISC 326 AND 335 AND 336 TO 340
STAN3/14/20 MISC 329 SEE INDEX FOR INSTRUMENT AND PART NAMES
STAN3/14/21 SIGHTING TELESCOPE MK I
STAN3/14/22 OBSOLETE NOT TO BE USED WITHOUT REF TO MR BOWPITT OR MR PATRICK
STAN3/14/23 MISC 334 AND 203 AND 380 AND TABLES VARIOUS
STAN3/14/24 SMITH CLOCK 326 HISC
STAN3/14/25 GENERAL NOTES AND MEMOS ON THERMOMETERS
STAN3/14/26 INFORMATION ON KATA THERMOMETERS & ENVIRONMENTAL WARMTH
STAN3/14/27 DRAWING LIST HEZZANITH SEXTANT
STAN3/14/28 METHODS REPORTS ON WORK FOR H.H.&P.
STAN3/14/29 HH&P
STAN3/14/30 H.H.P. MISC TRACINGS AND SKETCHINGS
STAN3/14/31 [Untitled]
STAN3/14/32 MISC? UNIDENTIFIED TRACINGS AND NOTES ETC
STAN3/14/33 2000 THERMOMETER NO 74A (CARRIER ENG LTD)
STAN3/14/34 2002 THERMOMETER FITTINGS (WASHERS AND ELBOW NO 3)
STAN3/14/35 2003 THERMOMETER NO 81
STAN3/14/36 2004 THERMOMETER NO 83
STAN3/14/37 2005 THERMOMETER NO 210
STAN3/14/38 2007 THERMOMETER NO 79
STAN3/14/39 2008 THERMOMETER NO 85
STAN3/14/40 2009 THERMOMETER NO 119
STAN3/14/41 2010 THERMOMETER NO 120
STAN3/14/42 2011 THERMOMETER NO 201
STAN3/14/43 2013 THERMOMETER NO 89
STAN3/14/44 2014 THERMOMETER NO 87
STAN3/14/45 2015 THERMOMETER POCKETS NO 123 and E142
STAN3/14/46 2019 THERMOMETER 2 1/2 INCH DIAL
STAN3/14/47 2020 THERMOMETER 2 1/2 INCH DIAL
STAN3/14/48 2047 THERMOMETER 6 INCH DIAL
STAN3/14/49 2075 TESTING MERCURIAL BAROMETER CHAMBER
STAN3/14/50 2075
STAN3/14/51 2076 ENAMEL METAL PRODUCTS
STAN3/14/52 2076
STAN3/14/53 2077 THERMOMETER E109 WITH REVOLVING SHUTTER
STAN3/14/54 2086 THERMOMETER 6 INCH DIAL
STAN3/14/55 2089 THERMOMETER SPECIAL NARROW DIA 14" CHEMICAL E332 AND 368
STAN3/14/56 2090 THERMOMETER E126
STAN3/14/57 2092 THERMOMETER E127
STAN3/14/58 2093 THERMOMETER E128
STAN3/14/59 2094 B.S.P. ADAPTORS (3/8IN X 1/2IN 2/1333) (1/2IN X 3/4IN 1/253)
STAN3/14/60 2095 BAROMETER TUBE FOR FORTIN'S PATT E727
STAN3/14/61 2096 BAROMETER FORTH PATT
STAN3/14/62 2097 FUNNEL - RAINGAUGE HOWARDS PATT
STAN3/14/63 2098
STAN3/14/64 2098 SURVEYORS ANEROID 5 INCH AND CASE TRACINGS
STAN3/14/65 2099 THERMOMETER CASE 12 INCH CHEMICAL 3/8 INCH DIA
STAN3/14/66 2101 THERMOMETER NO 197
STAN3/14/67 2102 THERMOMETER NO 199
STAN3/14/68 2103 BRINOMETER F5024
STAN3/14/69 2104 THERMOMETER H65 TAILPIECE ONLY
STAN3/14/70 DISTANCE READING THERMOMETER
STAN3/14/71 THERMOGRAPH DEVELOPMENT
STAN3/14/72 PROPOSED STANDARD THERMOMETERS
STAN3/16 Drawings Obsolete Misc W F S
STAN3/16/01 Defence Standard 05-24/Issue 2 INSPECTION SYSTEM REQUIREMENTS FOR INDUSTRY
STAN3/16/02 PRINCE The Production Requirements Inventory & Cost Evaluation System User Manual
STAN3/16/03 W.F. STANLEY & CO LTD SEXTANT SUGGESTED DESIGN 2
STAN3/16/04 Defence Standard 34-2/Issue 1 FLUX, SOLDERING (oleic acid based paste)
STAN3/16/05 TELESCOPIC ELBOW CONTRACT S1/5373
STAN3/16/06 G160 DICI WFS85447 (G160/C) MIL WFS85446 (G160/A) 360° WFS85442 (G160/B)
STAN3/16/07 Bostik PRODUCTS FOR INDUSTRY
STAN3/16/08 FLUXMASTER PRECISION MAGNETIC MEASURING EQUIPMENT
STAN3/16/09 ISO Metric Machine Screws
STAN3/16/10 ISO Metric Grade 8-8 high tensile bolts, screws and suitable nuts
STAN3/16/11 BOSTIK Literature
STAN3/16/12 CASCO-ML GRADE MLF-8
STAN3/16/13 CASCO-ML LOCKING SEALANT
STAN3/16/14 CASCO-ML GRADE MLF-9
STAN3/16/15 Beryllium copper crinkle washers for B.A., Unified and Metric threads. Technical Data.
STAN3/16/16 REPORT ON INVESTIGATION INTO BRG. ERRORS ON G160/- COMPASS
STAN3/16/17 REDUNDANT TRACINGS DRGS 1 TO 150
STAN3/16/18 INFORMATION ON GOVERNMENT CONTRACTS
STAN3/16/19 REDUNDANT GOVERNMENT DRWGS G1/
STAN3/16/20 REDUNDANT TRACINGS DRGS 151 TO 300
STAN3/16/21 REDUNDANT DRWGS 401-499
STAN3/16/22 SEXTANTS
STAN3/16/23 SEXTANTS
STAN3/16/24 OBSOLETE DRGS OPT. THEOD. DRG. 468
STAN3/16/25 REPORT ON A PRELIMINARY INVESTIGATION OF W.F. STANLEY AND CO. LTD., NEW ELTHAM, LONDON, S.E.9.
STAN3/16/26 FITTING INSTRUCTIONS FOR DRAFTING M/Cs
STAN3/16/27 OFFICE ORGANISATION
STAN3/16/28 MASSEY & JONES
STAN3/16/29 TELESCOPE ELBOW CONTRACT ML 31b/20
STAN3/16/30 P.M.C. CONCESSION APPLICATIONS PURCHASE ORDERS
STAN3/16/31 SUO 36077 BORE SIGHT CONTRACT 5129
STAN3/16/32 Statutory Instruments. 1965 No. 1105. Merchant Shipping Safety. The Merchant Shipping (Life-saving Appliances) Rules 1965
STAN3/16/33 DISTRIBUTION OF MINISTRY DRAWINGS RECORD
STAN3/16/34 OBSOLETE 438 & 466
STAN3/16/35 257 MK VI M ODDS & ENDS
STAN3/16/36 SEXTANT SURVEY MKIII LAYOUTS Z93-SH-VS
STAN3/16/37 D.M. LARGE SERVICING ADJUSTMENT
STAN3/16/38 52 OBSOLETE
STAN3/16/39 53 REPLACED BY DWG NO 222
STAN3/16/40 SEXTANT SURVEY MK III
STAN3/16/41 SESTREL SEXTANT LAYOUTS
STAN3/16/42 1/580
STAN3/16/43 NIGHT OXTANT .7" RADIUS
STAN3/16/44 PROPOSED REDESIGN OF .45 ARCHRO & .5" RAMSDEN EYE PIECES
STAN3/16/45 SPRING PLATES
STAN3/16/46 ELTHAM
STAN3/16/47 ADMIRAL FRIENDS PELORUS
STAN3/16/48 HARMONIC ANALYSER
STAN3/16/49 712 SPACEMASTER (LARGE) OBSOLETE DRGS
STAN3/16/50 FINISHING
STAN3/16/51 WP13959/C GUN RULE
STAN3/16/52 75 REPLACED BY DWG NO 418
STAN3/16/53 77 REPLACED BY DWG NO 414
STAN3/16/54 79 SEXTANTS 120E & 31 OBSOLETE DWGS 79 AND 89
STAN3/16/55 126 SEXTANT 130M OBSOLETE DWGS
STAN3/16/56 269 OBSOLETE RE-DESIGNED AND RE-DRAWN
STAN3/16/57 221 SUPERSEDED BY NO 3 DRAFTING M/C
STAN3/16/58 REDUNDANT DR'W'GS 301 - 399
STAN3/16/59 303 REPLACED BY DWG NO 517
STAN3/16/60 OPTICAL THEODOLITE ITEMS THAT HAVE NO CHANGE OR HAVE BEEN CHANGED
STAN3/16/61 REDUNDANT GOVT DWGS
STAN3/16/62 87
STAN3/16/63 [Sounding Winch (Hezzanith)]
STAN3/16/64 REDUNDANT DR'W'G'S 501 - 599
STAN3/16/65 OBSOLETE DRWGS 600 -
STAN3/16/66 [Sextant, Duralumin - Mark VI M]
STAN3/16/67 395 REDUNDANT SEE 269
STAN3/16/68 468 OBSOLETE
STAN3/16/69 489 (TRACED)
STAN3/16/70 527 REDUNDANT SEE MOD NO 472
STAN3/16/71 560 OBSOLETE
STAN3/16/72 REDUNDANT U.S.
STAN3/16/73 G59 (TRACED)
STAN3/16/74 650 (TRACED)
STAN3/16/75 [Untitled]
STAN3/16/76 [Small Sextant Reader]
STAN3/16/77 711 SPACEMASTER (D.E.) OBSOLETE DRGS
STAN3/16/78 ORIGINAL PLANIMETER, ROLLING DISC SEE 466/
STAN3/16/79 368 OBSOLETE
STAN3/16/80 29 OLD DRAWINGS
STAN3/16/81 REDUNDANT DWGS H.H.&P.
STAN3/16/82 655 TRACED
STAN3/17 Planimeter Files
STAN3/17/01 STANLEY INTEGRATORS NO.2 TOLERANCE INVESTIGATION ERROR CHART COMPILED FROM RECORD BOOKS
STAN3/17/02 PLANIMETER THEORY
STAN3/17/03 PLANIMETER DESIGN FOLDER
STAN3/17/04 INSTRUCTIONS - ALLBRIT RADIAL PLANIMETERS
STAN3/17/05 PLANIMETER (AUTOMATIC READING) LABEL FOR SETTINGS ETC AND BOOKLET
STAN3/17/06 PLANIMETERS - PRECISION DISC LABEL FOR SETTINGS ETC
STAN3/17/07 [Untitled]
STAN3/17/08 AUTO-READING PLANR RECORDER CHARTS D83
STAN3/17/09 [Untitled]
STAN3/17/10 ZERO SETTING PLANIMETER 27
STAN3/17/11 INSTRUCTIONS OF USE ALLBRIT PLANIMETER Q.40-47
STAN3/17/12 [Untitled]
STAN3/17/13 INSTRUCTIONS FOR USE - PLANIMETERS ZERO SETTING Q201 - Q211
STAN3/17/14 PANTAGRAPHS & EIDOGRAPHS
STAN3/17/15 Zero Set Planimeters
STAN3/17/16 INSTRUCTIONS MOTORISED PLANIMETER
STAN3/17/17 REPORTS, ETC., ON INTEGRATORS
STAN3/17/18 MOTORISED CONTINUOUS CHART PLANIMETER VIEW OF ASSEMBLEY WITH SIDE REMOVED
STAN3/17/19 HATCHETT PLANIMETER (A SIMPLE FORM OF PLANIMETER)
STAN3/17/20 INSTRUCTIONS REPLACEMENT OF SURFACE OF PLANIMETER DISC
STAN3/17/21 PLANIMETERS SPECIMEN SETTINGS ETC Q40 - Q70 SLIDING BAR SIMPLIFIED INSTRUCTIONS
STAN3/17/22 INSTRUCTIONS FOR USE - ALLBRIT PRECISION ROLLING DISC PLANIMETER
STAN3/17/23 PLANIMETERS W.F.S. LABORATORY REPORTS
STAN3/17/24 D.62 ZERO SETTING PLANIMETER (1968) - 1969/70
STAN3/17/25 INSTRUCTIONS - MOTORISED PLANIMETER
STAN3/17/26 ACCURACY OF PLANIMETERS
STAN3/17/27 D.62 (1967)
STAN3/17/28 D.62 (1968)/69/70
STAN3/17/29 PROGRESS SHEETS
STAN3/17/30 PRODUCT INTEGRATING PLANIMETER
STAN3/17/31 PLANIMETERS CORADI
STAN3/17/32 PLANIMETERS (COMPETITORS')
STAN3/17/33 SLIDING BAR PLANIMETER SPECIAL INSTRUCTION SHEET
STAN3/17/34 METRIC SETTINGS & CONSTANTS FOR INST. NO (OLD TYPE PLANRS) STANDARD SIZE X
STAN3/17/35 PLANIMETERS
STAN3/17/36 INTEGRAPH PRINTS
STAN3/17/37 INTEGRAPH INSTRUCTIONS. VARIOUS PRINTS OF DIAGRAMS
STAN3/17/38 INTEGRAPH LATEST FILE 1973
STAN3/17/39 ROLLING DISC PLANIMETER
STAN3/17/40 PLANIMETERS GENERAL 1967/70
STAN3/17/41 PAPER FRICTION TESTS (DAGOT-TREFILERIES ET LAMINORS DU HAVRE) AUG - SEPT 1963
STAN3/17/42 PLANIMETER LITERATURE
STAN3/17/43 PLANIMETERS AMSLER
STAN3/17/44 ZERO SETTING PLANIMETER
STAN3/17/45 PLANIMETERS OTT
STAN3/17/46 PLANIMETERS RULE FORM FIXED INDEX Q.80 - 89 SLIDING BAR Q92 - 96
STAN3/17/47 INSTRUCTIONS FOR USE PLANIMETER - CONTINUOUS CHART Q.110 A 8350 U 2340
STAN3/17/48 INTEGRATORS
STAN3/18 Design Information Planimeters Cam Types Q100 Q125 Q115
STAN3/18/01 THEORY OF INTEGRATORS, INTERGRAPH, HARMONIC ANALYSER
STAN3/18/01/1 NOTES AND THEORY OF PLANIMETERS AND INTERGRATORS
STAN3/18/01/2 INSTRUCTIONS FOR USE PLANIMETERS - RADIAL CAM-TYPE Q100. (UNIFORM CHARTS) Q.125 (NON-UNIFORM CHARTS)
STAN3/18/01/3 [Untitled]
STAN3/18/02 Q.100 A RULE-FORM PLANIM[ETERS]
STAN3/18/03 AUTOMATIC READING PLANIMETER (1963)
STAN3/18/04 Q100 E RULE FORM PLANIMETER
STAN3/18/05 Q.100 PLANIMETERS RULE FORM
STAN3/18/06 Q.100 B
STAN3/18/07 Q.100 C
STAN3/18/08 Q.100 D
STAN3/18/09 Q.100 F RULE-FORM PLANIMETER
STAN3/18/10 Q.100 G RULE-FORM PLANIMETER
STAN3/18/11 Q.100 J RULE-FORM PLANIMETER
STAN3/18/12 Q.100 K RULE FORM PLANIMETER
STAN3/18/13 Q.100 Q RULE-FORM PLANIMETER
STAN3/18/14 Q.100 R RULE-FORM PLANIMETER
STAN3/18/15 Q.100 T RULE-FORM PLANIMETER
STAN3/18/16 Q.100 U RULE-FORM PLANIMETER
STAN3/18/17 Q.100 V RULE-FORM PLANIMETER
STAN3/18/18 Q.100 AA RULE-FORM PLANIMETER
STAN3/18/19 Q.100 AB
STAN3/18/20 Q.100 AC RULE-FORM PLANIMETER
STAN3/18/21 Q.100 AD RULE-FORM PLANIMETER
STAN3/18/22 Q.100 AE RULE-FORM PLANIMETER
STAN3/18/23 Q.100 AF RULE-FORM PLANIMETER
STAN3/18/24 Q.100 AG RULE-FORM PLANIMETER
STAN3/18/25 Q.100 AH RULE-FORM PLANIMETER
STAN3/18/26 Q.100 AJ RULE-FORM PLANIMETER
STAN3/18/27 Q.100 AK RULE FORM PLANIMETER
STAN3/18/28 Q.115 - CAM TYPE PLANIMETERS - CONTINUOUS CHART
STAN3/18/29 Q.115 D CONTINUOUS CHART CAM-TYPE PLANIMETER
STAN3/18/30 Q.115 E CAM-TYPE CONTINUOUS CHART PLANIMETER
STAN3/18/31 Q.115 G CAM-TYPE CONTINUOUS CHART PLANIMETER
STAN3/18/32 Q.115 J CAM-TYPE CONTINUOUS CHART PLANIMETER
STAN3/18/33 Q.115 K CAM-TYPE CONTINUOUS CHART PLANIMETER
STAN3/18/34 Q.125 A CAM-TYPE RADIAL PLANIMETER
STAN3/18/35 Q.125 C CAM-TYPE RADIAL PLANIMETER
STAN3/18/36 Q.125 D CAM TYPE RADIAL PLANIMETER
STAN3/18/37 Q.125 E CAM TYPE RADIAL PLANIMETER
STAN3/18/38 Q.125 F CAM TYPE RADIAL PLANIMETER
STAN3/18/39 Q.125 G CAM-TYPE RADIAL PLANIMETER
STAN3/18/40 Q.125 H CAM-TYPE RADIAL PLANIMETER
STAN3/18/41 Q.125 J CAM-TYPE RADIAL PLAINMETER
STAN3/18/42 Q.125 K CAM-TYPE RADIAL PLANIMETER
STAN3/18/43 Q.125 L CAM-TYPE RADIAL PLANIMETER
STAN3/18/44 Q.125 M CAM-TYPE RADIAL PLANIMETER
STAN3/18/45 Q.125 N CAM-TYPE RADIAL PLANIMETER
STAN3/18/46 Q.125 P CAM-TYPE RADIAL PLANIMETER
STAN3/18/47 Q.125 R CAM-TYPE RADIAL PLANIMETER
STAN3/18/48 Q.125 Q CAM-TYPE RADIAL PLANIMETER
STAN3/18/49 Q.125 S CAM-TYPE RADIAL PLANIMETER
STAN3/18/50 Q.125 T CAM-TYPE RADIAL PLANIMETER
STAN3/18/51 Q.125 U CAM-TYPE RADIAL PLANIMETER
STAN3/18/52 Q.125 V CAM-TYPE RADIAL PLANIMETER
STAN3/18/53 Q.125 W CAM-TYPE RADIAL PLANIMETER
STAN3/18/54 Q.125 Y (C) CAM-TYPE RADIAL PLANIMETER
STAN3/18/55 Q.125 Z CAM-TYPE RADIAL PLANIMETER
STAN3/18/56 Q.125 AC CA-TYPE RADIAL PLANIMETER
STAN3/18/57 Q.125 AD CAM TYPE RADIAL PLANIMETER
STAN3/18/58 QF.125 AE CAM-TYPE RADIAL PLANIMETER
STAN3/18/59 Q.125 AF CAM-TYPE RADIAL PLANIMETER
STAN3/18/60 Q.125 AG CAM-TYPE RADIAL PLANIMETER
STAN3/18/61 Q.125 AJ CAM-TYPE RADIAL PLANIMETER
STAN3/18/62 Q.125 AK CAM-TYPE RADIAL PLANIMETER
STAN3/18/63 Q.125 AL CAM-TYPE RADIAL PLANIMETER
STAN3/18/64 Q.125 AM CAM-TYPE RADIAL PLANIMETER
STAN3/18/65 Q.125 AN CAM-TYPE RADIAL PLANIMETER
STAN3/18/66 Q.125 AP CAM-TYPE RADIAL PLANIMETER
STAN3/18/67 Q.125 AQ CAM-TYPE RADIAL PLANIMETER
STAN3/18/68 Q.125 AR CAM-TYPE RADIAL PLANIMETER
STAN3/18/69 Q.125 AS CAM-TYPE RADIAL PLANIMETER
STAN3/18/70 Q.125 AV CAM-TYPE RADIAL PLANIMETER
STAN3/18/71 Q.125 AY CAM-TYPE RADIAL PLANIMETER
STAN3/18/72 Q.125 BD CAM-TYPE RADIAL PLANIMETER
STAN3/18/73 Q.125 BE CAM-TYPE RADIAL PLANIMETER
STAN3/18/74 Q.125 BH CAM-TYPE RADIAL PLANIMETER
STAN3/18/75 Q.125 BK CAM-TYPE RADIAL PLANIMETER
STAN3/18/76 Q.125 BQ
STAN3/19 Design Information (Gen)
STAN3/19/01 [Circular Letter from SGS-Fairchild Limited]
STAN3/19/02 [Advert for Metacoustic Aluminium Strip Ceiling]
STAN3/19/03 [Letter from IMPCO (Southall) Ltd]
STAN3/19/04 Technical Data Bulletin RC-2 Resin
STAN3/19/05 [Copies of Various Engineering Materials and Design information sheets]
STAN3/19/06 [Comparitive Hardness Values for Drawing Office Specification No. 96]
STAN3/19/07 GENERAL DRAWING PROCEDURE
STAN3/19/08 FOLDER 10
STAN3/19/09 D.O. MANUAL SECTION J. 22 COMP. HARDENESS VALUES (SPARE COPIES)
STAN3/19/10 FILE INDEX
STAN3/19/11 102 THEODOLITES MICROMETER PATTERN
STAN3/19/12 106 INSTRUCTIONAL THEODOLITE
STAN3/19/13 150 LEVELS, GENERAL
STAN3/19/14 150 - LEVELS, GENERAL - JAN 1958
STAN3/19/15 152 READABLE LEVEL MEAN READING (A505)
STAN3/19/16 154 LEVEL, AUTOMATIC SEPT 1959-
STAN3/19/17 200 MISCELLANEOUS OTHER SURVEYING INSTRUMENTS
STAN3/19/18 202 STAVES & PICKETS - JAN 1958
STAN3/19/19 209 STANDS
STAN3/19/20 211 BRUNTON MINE TRANSITS - JAN 1958
STAN3/19/21 252 PANTOGRAPHS, EIDOGRAPHS - JAN 1958
STAN3/19/22 256/1 PARALLEL MOTION UNIT "DRAFTMASTER"
STAN3/19/23 256 DRAFTING MACHINES - JAN 1958
STAN3/19/24 310 - AUTOMATIC READING PLANIMETERS
STAN3/19/25 P24 POCKET LEVEL SITEMASTER 1963/66
STAN3/19/26 263 SPACEMASTER DRAFTING MACHINE
STAN3/19/27 305 PRECISION DISC PLANIMETER
STAN3/19/28 311 RADIAL PLANIMETERS - JAN 1958
STAN3/19/29 313 RULE FORM PLANIMETERS - JAN 1958
STAN3/19/30 315 PLANIMETERS, GENERAL
STAN3/19/31 350 FULLER CALCULATOR - JAN 1958
STAN3/19/32 400 SEXTANTS - JAN 1965
STAN3/19/33 450 - MAGNETIC COMPASSES, MARINE, JAN. 1958
STAN3/19/34 451 - BINNACLES
STAN3/19/35 454 - PROJECTOR COMPASSES - JAN. 1958
STAN3/19/36 456 - COMPASS + BINNACLE TYPE CERTIFICATES (A.C.O.) COPIES & ORIGINALS
STAN3/19/37 459 - S.W.M.F. COMPASSES (BOSUN, CADET, PILOT, CAPTAIN TYPE) FROM JUNE 1970
STAN3/19/38 504 THERMOMETER CASES
STAN3/19/39 551 - MERCURIAL BAROMETERS - RAIN GAUGES
STAN3/19/40 602 MISCELLANIOUS NAVIGATIONAL INSTRUMENTS
STAN3/19/41 603 - MISCELLANEOUS INSTRUMENTS - FROM JAN. 1965
STAN3/19/42 610 - ASTRONOMICAL TELESCOPE
STAN3/19/43 611 - SKID RESISANT TESTER. (COMPLAINT ORDERS)
STAN3/19/44 613 - MISCELLANEOUS OPTICAL INSTRUMENTS
STAN3/19/45 614 HIGH TEMPERATURE CAMERA
STAN3/19/46 757 - GRATICULES & GLASS CIRCLES - JAN. 1958
STAN3/20 Design Information (General)
STAN3/20/01 INTEGRAPH
STAN3/20/02 SURVEYING EQUIPMENT HANOVER FAIR 1970
STAN3/20/03 DRAFTING M/C SCALES (COMPETITORS)
STAN3/20/04 DRAFTING EQUIPMENT HANOVER FAIR 1970
STAN3/20/05 LEVELS THEODOLITES COMPETITORS
STAN3/20/06 HARMONIC ANALYSIS
STAN3/20/07 ENGINEERING DESIGN SHOW BRIGHTON 3.3.70
STAN3/20/08 SEXTANTS - COMPETITORS
STAN3/20/09 PANTAGRAPH
STAN3/20/10 MATHEMATICAL INSTS. VARIOUS
STAN3/20/11 CURVE READER
STAN3/20/12 HARMONIC SYNTHESISER
STAN3/20/13 AUTOMATIC DRAFTING MACHINE
STAN3/20/14 HARMONIC ANALYSER (TECHNICAL NOTES)
STAN3/20/15 POLAR CO-ORDINATE PLOTTER
STAN3/20/16 GRADECUTTER
STAN3/20/17 POLARIMETER - MATTERS RELATING TO ACTUAL ENQUIRIES AND ORDERS
STAN3/20/18 HARMONIC ANALYSER
STAN3/20/19 HEELING ERROR INSTRUMENT KELVINS VERTICAL FORCE INSTRUMENT THALEN TIBERG MAGNETOMETER
STAN3/20/20 SURVEYING INSTRUMENTS EXHIBITED AT HANOVER FAIR
STAN3/20/21 PHOTO-ELECTRIC POLARMETER
STAN3/20/22 FULLER CALCULATORS
STAN3/20/23 COMPLEX NUMBER SLIDE RULE
STAN3/20/24 SLIDE RULES
STAN3/20/25 POLARIMETER AHREND
STAN3/20/26 HYPSOMETER (BRANDIS)
STAN3/20/27 BRUNTON MINE TRANSIT
STAN3/20/28 STAR GLOBE
STAN3/20/29 SPACEMASTER MK II SERVICE INSTRUCTIONS (R11 - 115)
STAN3/20/30 SERVICE MANUAL SPACEMASTER MK II
STAN3/20/31 D.206 RACING COMPASS
STAN3/20/32 I.S.O. COMPASS TEST PROCEEDURE
STAN3/20/33 INVESTIGATION INTO THE STANDARDISATION OF SCREWS
STAN3/20/34 COMPASSES BINNACLES AZIMUTHS I.S.O. + BRITISH STANDARDS FOR, + LIST OF RUSSIAN STANDARDS FOR INSTRUMENTS
STAN3/20/35 LASERS CORRESPONDENCE
STAN3/20/36 [Note from British Standards Institution]
STAN3/20/37 LASERS. LITERATURE, REPORTS
STAN3/20/38 OPTICAL GLASS CHANCE-PILKINGTON
STAN3/20/39 OPTICAL
STAN3/20/39/1 D156 [Combined Optical Industries Limited Moulded Plastic Lenses
STAN3/20/39/2 OPTICAL
STAN3/20/39/3 COMPUTATIONS IN OPTICS WITH ELECTRONIC COMPUTERS LECTURES 1 -
STAN3/20/39/4 [Untitled]
STAN3/20/40 FILTERS
STAN3/20/41 NAMEPLATES & LABELS STANLEY INSTRUMENTS
STAN3/20/42 SAMPLE FORM C.D. 1B FORM (APPLICATION FOR COMPASS CERTS) AND PHOTOSTAT COPIES OF COMPASS CERTS
STAN3/20/43 COMPASS PAINTS - LUMINOUS
STAN3/20/44 COMPASS
STAN3/20/45 COMPASS DATA
STAN3/20/46 REFLECTOR BINNACLE MK. VIII
STAN3/20/47 COMPASS (GENERAL)
STAN3/20/48 A.C.O.
STAN3/20/49 52 COMPASS GENERAL
STAN3/20/50 ADMIRALTY COMPASS PAINTS
STAN3/20/51 [Untitled]
STAN3/20/52 COMPASS PAINTS
STAN3/20/53 COMPASSES. FRICTIONAL ERROR
STAN3/20/54 PLASTICS FOR COMPASSES
STAN3/20/55 [2 Brochures for Navigational Equipment]
STAN3/20/56 AMSLER DIVIDING MACHINE
STAN3/20/57 SPECIFICATION No. PT/1 ISSUE 1 ADMIRALTY MICROMETER TYPE MARINE SEXTANTS
STAN3/20/58 LEVELS
STAN3/20/59 SEXTANT SHADES
STAN3/20/60 [Untitled]
STAN3/20/61 SEXTANT LIGHTING
STAN3/20/62 SCALES
STAN3/20/63 D.125 SCALES (MR WALL'S FILE)
STAN3/20/64 ALIDADES
STAN3/20/64/1 [Untitled]
STAN3/20/64/2 203 ALIDADES
STAN3/20/64/3 STATION POINTER 6" & 8"
STAN3/20/64/4 RANGING POLES
STAN3/20/64/5 STAFF FACINGS
STAN3/20/64/5/1 STAFF FACINGS
STAN3/20/64/5/2 SURVEYORS STAFFS (GENERAL)
STAN3/20/64/5/3 INSTRUCTIONS FOR USE - ALL METAL LEVELING STAFF
STAN3/20/65 BUBBLES
STAN3/20/66 HYDROMETERS
STAN3/20/67 MEKOMETER
STAN3/20/68 PROJECTORS
STAN3/20/69 THERMOMETERS
STAN3/21 Process
STAN3/21/01 Silk Screens
STAN3/21/02 CHEMICAL PROCESSES & MATERIAL TESTS
STAN3/21/03 PROPS. OF MATERIALS
STAN3/21/04 PLATING & ALLIED PROCESSES
STAN3/21/05 MAGNETS. MAG. MATERIALS.
STAN3/21/06 CLEAN ROOMS
STAN3/21/07 MICROFILMING
STAN3/21/08 METALLISED LINES ON GLASS
STAN3/21/09 ENCAPSULATION: MATERIALS + TECHNIQUES
STAN3/21/10 CHARCOAL. PREPARATION OF FROM WILLOW BLOCKS
STAN3/21/11 PRODUCT FINISHING
STAN3/21/12 SMALL TOOLS & GAUGES STANDARDS FOR,
STAN3/21/13 IRON & STEEL
STAN3/21/14 IMPERIAL SMELTING CORP LTD TECH REPORT
STAN3/21/15 ANODISING
STAN3/21/16 SILVERING
STAN3/21/17 THERMOMERTY
STAN3/21/18 INSTRUMENT TESTS
STAN3/21/19 PHOTO-ETCHING
STAN3/21/19/1 CLEAN ROOMS PHOTO-ETCHING (ABSTRACTS)
STAN3/21/19/2 Untitled [Folder of Process Control Records]
STAN3/21/19/3 PHOTO-ETCHING
STAN3/21/19/4 ETCHING ETC
STAN3/21/19/5 GRATICULES
STAN3/21/19/6 THIN FILMS
STAN3/21/19/7 RESIN
STAN3/21/19/8 MATERIALS PROCESSERS ETC SILK SCREENING
STAN3/21/20 ADHESIVES FILE: DRAFTING SCALE ADHESIVES
STAN3/21/21 PACKING
STAN3/21/22 INSPECTION INSTRUCTIONS
STAN3/21/23 LABORATORY
STAN3/21/24 ADHESIVES
STAN3/22 Ministry & Contract Drawings
STAN3/22/01 ENSIGN COMPASS DWGS
STAN3/22/02 [491 Sextant]
STAN3/22/03 SITEMASTER STAND
STAN3/22/04 MINI-MASTER DRAFTING M/C
STAN3/22/05 [Sextant Patt 491 / Binnacle Patt. 9222]
STAN3/22/06 PELORUS
STAN3/22/07 TELESCOPIC STAFF 31321 -
STAN3/22/08 MK III S.L. BINNACLE
STAN3/22/09 DRAWINGS RELATING TO SALES ORDERS
STAN3/22/10 A.S.W.E. CONNECTION BOX DRGS
STAN3/22/11 PATT 6703 AZIMUTH
STAN3/22/12 921 PATT. COMPASS DRAWINGS (UNIT SPECS COMPLETTED)
STAN3/22/13 [Pattern 921 Compass]
STAN3/22/14 DRAWINGS T.S.R. 2 FLOAT CHAMBER
STAN3/22/15 TELESCOPIC STAFF 31005 - 31251
STAN3/22/16 1151 COMPASS
STAN3/22/17 DRGS. PATT. 919 COMPASS (MFG SCHEDULE & ADMIRALTY SPEC)
STAN3/22/18 [Patt 1950 Azimuth Circle]
STAN3/22/19 [Patts 189 & 189N Binnacles]
STAN3/22/20 A.516 (SPARE COPY) PATT 1950 AZIMUTH CIRCLE (REPAIRS) MODIFIED DWGS ETC
STAN3/22/21 5" CLINOMETER
STAN3/22/22 COMPASS, FIG. 301 NO.7/3 (8" CARD) NEEDLE BEARING TYPE 535
STAN3/22/23 COMPASS, LIQUID PRISMATIC (4 1/2" CASE 3 1/2" RING) DRAWING NO. 243
STAN3/22/24 RAINGAUGE M.O. PATT: MK II MATERIAL LISTS, UNIT SPEC: AND LAYOUTS
STAN3/22/25 A.518 PATT. 1151 COMPASS
STAN3/22/26 COMPASS-CAPTAIN (SWMF NO.3A)
STAN3/22/27 G16 TRACINGS BINNACLE PATT 190 INCLUDING INCLINOMETER
STAN3/22/28 S.W.M.F. NO5 COMPASS (ADMIRAL) DRAWINGS 737
STAN3/23 M O D Contracts Contracts (Progress) G O G/Main Contract
STAN3/23/01 [Dockhead Mounting, Mount]
STAN3/23/02 BLIND ASSY MM961230
STAN3/23/03 TRIPOD COMPASS
STAN3/23/04 MM961220 THUMBSCREW WINDOW OPT INST
STAN3/23/05 FAIRY AUSTRALASIA PTY LTD
STAN3/23/06 CANADIAR HARES CONTRACT
STAN3/23/07 GASKET 2650
STAN3/23/08 SCREW STOP CELL ASSY 500 MM 961302
STAN3/23/09 MIRROR AND BRACKET ASSY PRISM L.H MM958897
STAN3/23/10 [Order forms with notes]
STAN3/23/11 PRISM ASSY ML31 B 1923 (70 OFF) (50) (112) (90 OFF)
STAN3/23/12 COMPASS (RON 1430) PROJECTOR (JR09014) FOR REPAIRS (GG31008) (JR12029)
STAN3/23/13 MM967149 LENS (OPTICAL INST) 195
STAN3/23/14 MM960977 PRISM ASSY MM960977 ADDITION
STAN3/23/15 THUMBSCREW/FILTER/THUMBSCREW HEATER AND THERMOSTAT ASSY VS/MM961178 KG39018
STAN3/23/16 PULLEY MM877604 100
STAN3/23/17 ERECTOR LENS MM961152 40 OFF
STAN3/23/18 RING EXT THD KG33010 100 OFF
STAN3/23/19 SIGHT UNIT MOUNT ML31B/1006
STAN3/23/20 SHAFT SHOULDER (125 OFF) (KG22014)
STAN3/23/21 MM967181 LENS 500 OFF
STAN3/23/22 ML31B/1050 1033 OFF MOUNT IMAGE INTENSIFIER
STAN3/23/23 V5/MM961023 BLIND ASSY 776 OFF
STAN3/23/24 MM967235 KH28010 BLOCK FIXING/ADAPTORS
STAN3/23/25 COMPASS 50012/PB10718
STAN3/23/26 SPRING CONTROL DIAL
STAN3/23/27 ANTENA ALIGNMENT TEST SET (30 OFF) (128) NCW 253/1161
STAN3/23/28 DIAL SIGHT
STAN3/23/29 RANGE AND FUZE READER 93567/4 20 OFF
STAN3/23/30 MM961332
STAN3/23/31 DEFLECTION DRUM ASSY 0510655A MM961261 KG44006
STAN3/23/32 SIGHT MORTAR SIGHT 1926 OFF ML31B/946
STAN3/23/33 KW39016 2000 G150/Lightweight
STAN3/23/34 PRISMATIC COMPASS KW35015 STOCK
STAN3/23/35 KW37008 ELBOW TELESCOPE DIAL SIGHT GLASSWORK
STAN3/23/36 GRATICULE (RUSSIAN) KG41011 CONTRACT NO 15722
STAN3/23/37 [Order form]
STAN3/24 Ministry Contracts SUO's and Contract Control
STAN3/24/01 MOD CONTRACT CONTROL PROGRESS REPORTS
STAN3/24/02 [Untitled]
STAN3/25 Stationery
STAN3/25/01 [Map Salisbury & Bulford]
STAN3/25/02 [Blank Memos]
STAN3/25/03 Training Schedule for Drilling & Tapping on Seurdure Spindle Drilling Machines
STAN3/25/04 [Blank Stationery and Information Booklets]
STAN3/25/05 SECTION 6 FOREIGN GLOSSARIES
STAN3/25/06 [Booklet and blank stationery]
STAN3/25/07 [Weekly Time Sheet and Area Conversion Tables]
STAN3/25/08 TECHNICAL DEPARTMENT REPORTS JAN 1957 TO OCT 1965
STAN3/25/09 TRAINING GRANTS 1972-73
STAN3/25/10 VACUUM COATING TECHNIQUE
STAN3/25/11 SOLUTION BY LAPLACE TRANSFORMATION FOR THE EQUALISATION PROCESS IN LINEAR NETWORKS APPLIED TO AUTOMATIC REGULATION
STAN3/25/12 COMMITTEE OF MANAGEMENT
STAN3/25/13 PROPOSED DEVELOPEMENT PROGRAMME 1966-1969
STAN3/25/14 M.F.H. MANAGEMENT MEETING MINUTES
STAN3/25/15 C.S.I. PROCEEDURES
STAN3/25/16 IASTE VACATION SCHEME (OVERSEAS STUDENTS) 852
STAN3/25/17 M.F. Hurrey MR E.H.Y. BURDEN MR RUST 950
STAN3/25/18 AUTOMATION IN THE DRAWING OFFICE CONFERENCE BOOKLETS
STAN3/25/19 THE AUTOMAT CONSTRUCTION SETS and IRWIN
STAN3/25/20 SUGGESTIONS SCHEME
STAN3/25/21 FLORIN LIMITED
STAN3/25/22 PRODUCT REVIEW PROCEEDURE
STAN3/25/23 PATENTS NO 2
STAN3/25/24 [Untitled]
STAN3/25/25 R&D MINUTES MANAGEMENT MINUTES
STAN3/25/26 SPECIAL PROJECT REPORTS AND INSTRUMENT COMPARISONS
STAN3/25/27 DEVELOPMENT MEETING MINUTES
STAN3/26 Misc
STAN3/26/01 D.O.
STAN3/26/01/1 D.O. & PROTOTYPE SHOP PERSONNEL
STAN3/26/01/2 D.O. MATERIALS, STATIONERY
STAN3/26/01/3 BOOKS, PERIODICALS OFC No 224
STAN3/26/01/4 PRINT ROOM & DYELINE MACHINE
STAN3/26/01/5 COPYCAT
STAN3/26/02 MASTER COPY [of drawing office procedure]
STAN3/26/03 D.O. STAFF (GEN)
STAN3/26/04 DESIGN OFFICE MANUAL DATA SHEETS (MASTERS)
STAN3/26/05 LIBRARY CORRESPONDENCE
STAN3/26/06 NAVIGATIONAL INSTRUMENTS
STAN3/26/07 S.E.A.L. INFORMATION SERVICE
STAN3/26/08 66 - VISITS TO WORKS
STAN3/26/09 TRAINING FORMS
STAN3/26/10 OVERSEAS STUDENTS
STAN3/26/11 Untitled [Education Grant Information and Test Papers]
STAN3/26/12 B.S.I. CORRESPONDENCE
STAN3/26/13 S.I.M.A. 1970/71
STAN3/26/14 VALUE ENGINEERING
STAN3/26/15 P.E.R.A.
STAN3/26/16 SIRAID
STAN3/26/17 S.I.R.A CORRESPONDENCE
STAN3/26/17/1 S.I.R.A. LIBRARY
STAN3/26/17/2 S.I.R.A. (1968) (1969) (1970)
STAN3/26/17/3 Untitled
STAN3/26/18 THAMES POLYTECHNIC
STAN3/26/19 COUNCIL OF INDUSTRIAL DESIGN
STAN3/26/20 DESIGN WORK STUDY
STAN3/26/21 BRITISH NAUTICAL INST. TRADE ASS'N
STAN3/26/22 D.O.M.M.D.A
STAN3/26/23 STANLEY SEALEY INSTRUMENTS LTD. GENERAL CORRESPONDENCE
STAN3/26/24 MIN. OF TECHNOLOGY (R.A.E)
STAN3/26/25 NEW PROJECTS
STAN3/26/25/1 NEW PROJECTS
STAN3/26/25/2 Special Lens Attachment
STAN3/26/25/3 PATETNS, NEW INVENTIONS, ETC.
STAN3/26/25/4 STANLEY-SEALEY
STAN3/26/25/5 H.H.P. POLARIMETER RE-DESIGN
STAN3/26/25/6 RAINGAUGES (DINES TILTING) INSPECTION INSTRUCTIONS
STAN3/26/26 H.H.P. HYDROMETERS CATALOGUE CROSS-REF.
STAN3/26/27 CONSULTANTS. (DESIGN STUDY)
STAN3/26/28 STANLEY-SEALEY INSTRUMENTS LTD ENQUIRIES (ANSWERS)
STAN3/26/29 METRICATION
STAN3/26/30 METRICATION ABSTRACTS
STAN3/26/31 METRICATION
