Solar spectroscope by Howard Grubb, Dublin, 1871

Three-prism solar spectroscope with automatic prism adjustment for minimum deviation and a fixed equatorial mounting with drive by Howard Grubb, Dublin, dated 1871. Supplied by the Royal Society of London to J.B.N.Hennessey who used the instrument at Vincent Hill, Dehra Dun in the Indian foothills [7,000 ft.] of the Himalayas to map the solar spectrum between 1871-5.

Dated 1871, this three-prism spectroscope with equatorial stand was made in Dublin by Howard Grubb. Better known as a maker of telescopes, Grubb supplied this instrument to the Royal Society of London for an expedition to India. Here between 1871-5, it was used by J B N Hennessey to map and measure in detail the spectrum of the Sun. The instrument was located on Vincent Hill, Dehra Dun at over 7000 feet (2300m) in the Indian foothills of the Himalayas. It was hoped that the high altitude would provide clearer air and show greater resolution than had been seen at sea level. In the event, the results were disappointing with little if any extra detail being recorded.

Details

Category:
Astronomy
Object Number:
1927-807
Materials:
steel, brass and glass
type:
spectroscope - solar and prism
credit:
The Royal Society

Parts

One of two cases for a three prism spectroscope by Howard Grubb

One of two cases for a three prism spectroscope by Howard Grubb

One of two cases for a three prism spectroscope by Howard Grubb, Dublin.

Materials:
mahogany
Object Number:
1927-807 Pt1
type:
components , storage boxes and instruments
One of two cases for a three prism spectroscope by Howard Grubb

One of two cases for a three prism spectroscope by Howard Grubb

One of two cases for a three prism spectroscope by Howard Grubb, Dublin.

Measurements:
overall: 280 x 490 x 195 mm
Materials:
pine
Object Number:
1927-807 Pt2
type:
components , storage boxes and instruments
Image ©
The Board of Trustees of the Science Museum
Three prism solar spectroscope with automatic prism adjustment and a fixed equatorial mounting with drive by Grubb

Three prism solar spectroscope with automatic prism adjustment and a fixed equatorial mounting with drive by Grubb

Three prism solar spectroscope with automatic prism adjustment and a fixed equatorial mounting with drive by Grubb, Dublin, dated 1871.

Measurements:
overall: 400 x 550 x 350 mm
Materials:
brass , steel , glass and complete
Object Number:
1927-807 Pt3
type:
instrument component , spectroscope - solar and prism
Image ©
The Board of Trustees of the Science Museum
Accessories for Solar Spectroscope

Accessories for Solar Spectroscope

16 Accessories; including three lens’, a prism held in a circular box, a prism within a cylindrical tube, two lens caps, four square metal plates, two metal rods, three metal cylinders fitted with rectangular pieces on either side. These accessories are for a three prism solar spectroscope. By Howard Grubb, Dublin, dated 1871. Supplied by the Royal Society of London to J.B.N.Hennessey who used the instrument at Vincent Hill, Dehra Dun in the Indian foothills [7,000 ft.] of the Himalayas to map the solar spectrum between 1871-5.

Materials:
steel (metal) , brass (copper, zinc alloy) , glass and cotton (fibre)
Object Number:
1927-807/4
type:
accessories
Image ©
The Board of Trustees of the Science Museum