Stocking Knitting Frame and Accessories by Cooper Corah and Sons.

Stocking knitting frame by Cooper Corah and Sons, Leicester, England, about 1777.

This knitting machine, although made in about the 1770s, is similar to the original frame invented by the Rev. William Lee in 1589.

There is a horizontal row of needles with hooks or beads, which can be depressed by the pressure bar, so that the points of the needles enter grooves in the shanks to form closed hooks. Between the needles are notched steel plates called sinkers. The alternate sinkers are in two sets; the jacks, which can be raised or lowered individually and the leads, which move up or down together.

The thread is placed over the needles and the jack sinkers are dropped successively to form loops over every second needle. The lead sinkers are then lowered and the jacks raised together a little to divide, double and equalise the loops between each pair of needles. The sinkers are then brought forward to push the loops under the beards. The presser is brought down to close the beards. The sinkers are raised and brought forward to land the previous course of loops on the beards. The presser is raised and the sinkers continue forward to knock over the fabric from the needles onto the new course of loops. The sinkers are again lowered and moved back, taking with them the fabric, now suspended from the last course, clear of the beads. The sinkers are then raised ready for the next cycle of operations, each of which results in the addition of a course of loops to the fabric.

Details

Category:
Textiles Machinery
Object Number:
1897-136
Materials:
timber, lead, wrought iron and steel
Measurements:
overall: 2020 x 980 x 980 mm, , 183kg
type:
stocking frame
credit:
N. Corah and Sons Ltd.

Parts

Accessories for a Stocking Knitting Frame by Cooper Corah and Sons.

Accessories for a Stocking Knitting Frame by Cooper Corah and Sons.

Parts and accessories mainly to do with setting the knitting frame to produce knitted material and not all are contemporary, supplied by Cooper Corah and Sons, Leicester, England. Approximately 46 needles in cardboard box; app. 45 needles of different end fitting; 8 washers; six light tools for handling thread; three thin steel rods; three iron square nut wrenches, two of which have hammer head shape to the wrench; one pair of light pointed pliers; one roll of stocking-net; two bobbins of wool thread, one green, one red.

Materials:
thread , cast iron , wood and lead
Object Number:
1897-136/1
type:
stocking frame
Stocking knitting frame by Cooper Corah and Sons, c. 1777

Stocking knitting frame by Cooper Corah and Sons, c. 1777

Stocking knitting frame by Cooper Corah and Sons, Leicester, England, about 1777.

More

This knitting machine, although made in about the 1770s, is similar to the original frame invented by the Rev. William Lee in 1589.

There is a horizontal row of needles with hooks or beads, which can be depressed by the pressure bar, so that the points of the needles enter grooves in the shanks to form closed hooks. Between the needles are notched steel plates called sinkers. The alternate sinkers are in two sets; the jacks, which can be raised or lowered individually and the leads, which move up or down together.

The thread is placed over the needles and the jack sinkers are dropped successively to form loops over every second needle. The lead sinkers are then lowered and the jacks raised together a little to divide, double and equalise the loops between each pair of needles. The sinkers are then brought forward to push the loops under the beards. The presser is brought down to close the beards. The sinkers are raised and brought forward to land the previous course of loops on the beards. The presser is raised and the sinkers continue forward to knock over the fabric from the needles onto the new course of loops. The sinkers are again lowered and moved back, taking with them the fabric, now suspended from the last course, clear of the beads. The sinkers are then raised ready for the next cycle of operations, each of which results in the addition of a course of loops to the fabric.

Measurements:
overall: 2020 mm x 980 mm x 980 mm, 183 kg
Materials:
timber , lead , wrought iron , steel and complete
Object Number:
1897-136/2
type:
stocking frame
Seat for a Stocking Knitting Frame by Cooper Corah and Sons.

Seat for a Stocking Knitting Frame by Cooper Corah and Sons.

Seat for a stocking knitting frame by Cooper Corah and Sons, Leicester, England, c.1777.

More

This knitting machine, although made in about the 1770s, is similar to the original frame invented by the Rev. William Lee in 1589.

There is a horizontal row of needles with hooks or beads, which can be depressed by the pressure bar, so that the points of the needles enter grooves in the shanks to form closed hooks. Between the needles are notched steel plates called sinkers. The alternate sinkers are in two sets; the jacks, which can be raised or lowered individually and the leads, which move up or down together.

The thread is placed over the needles and the jack sinkers are dropped successively to form loops over every second needle. The lead sinkers are then lowered and the jacks raised together a little to divide, double and equalise the loops between each pair of needles. The sinkers are then brought forward to push the loops under the beards. The presser is brought down to close the beards. The sinkers are raised and brought forward to land the previous course of loops on the beards. The presser is raised and the sinkers continue forward to knock over the fabric from the needles onto the new course of loops. The sinkers are again lowered and moved back, taking with them the fabric, now suspended from the last course, clear of the beads. The sinkers are then raised ready for the next cycle of operations, each of which results in the addition of a course of loops to the fabric.

Measurements:
overall: 52 mm x 835 mm x 210 mm,
Object Number:
1897-136/3
type:
stocking frame