Webbing weaving loom
Webbing weaving loom
Ammunition pouch and webbing weaving loom
Ammunition pouch and webbing weaving loom
Details
Parts
Two wire mesh guards
Two wire mesh guards, smaller for guarding bevel drive front lower left side, larger for main motor belt drive
- Object Number:
- 1993-614/2
- type:
- guards
10 warp reels
10 Warp reels. These mounted on part /5 at front lower end. 4 of these filled with warp
- Object Number:
- 1993-614/3
- type:
- warp reel
3 warp reels (direct drive type)
3 warp reels (direct drive type), one is broken. These for mounting front end mid height. 1 warp reel for mounting at high level
- Object Number:
- 1993-614/4
- type:
- warp reel
3 cages for holding item 3 on the loom
3 cages for holding item 3 on the loom, two of these with spindle. The cages would bolt to bottom front of loom
- Object Number:
- 1993-614/5
- type:
- cage
Cast-brackets
4 cast-brackets to be bolted at high level front to support reels. 2 short cast brackets
- Object Number:
- 1993-614/6
- type:
- bracket
Collection of spindles
5 spindles 420mm long; 4 spindles 390mm long; 2 spindles 28mm long; 1 stub and nut
- Object Number:
- 1993-614/7
- type:
- spindle
Two C.I. supports and part of one that is broken
Two C.I. supports and part of one that is broken. One cast iron bracket and stud & nut. Large washer, two dry bearings and two pattern chain washers. 2 bracket fixing bolts
Revolution counter with two digital counter scales
One revolution counter with two digital counter scales. For positioning on revolution counter drive fixed to horizontal drive shaft on the loom
- Object Number:
- 1993-614/9
- type:
- scales - weighing device
16 weights
16 weights, 5 weight holding rods; 1 cranked weight holding rod; 1 oil can
- Object Number:
- 1993-614/10
- type:
- weights
Two shuttle holders
2 shuttle holders complete. 2 incomplete shuttle holders are also attached to the loom
- Object Number:
- 1993-614/11
- type:
- shuttle holders
