Myford ML7 lathe; 3 jaw and 4 jaw chucks

Myford ML7 lathe; 3 jaw and 4 jaw chucks (faceplate, catch plate, drill chuck); tool holders; tools and centres

Details

Category:
Hand and Machine Tools
Object Number:
1983-777
type:
lathe
credit:
Science Museum (Dept.6)

Parts

Lathe with motor and guards on cabinet, with lamp

Lathe with motor and guards on cabinet, with lamp

Lathe with motor and guards on cabinet, with lamp

Measurements:
overall: 1390 mm x 1030 mm x 460 mm,
Object Number:
1983-777/1
type:
lathes
Faceplate

Faceplate

Faceplate

Measurements:
overall: 28 mm x 170 mm x 170 mm,
Object Number:
1983-777/2
type:
faceplate
Catch plate and pin

Catch plate and pin

Catch plate and pin

Measurements:
overall: 65 mm x 115 mm x 115 mm,
Object Number:
1983-777/3
type:
catch plate
3 jaw self-centering chuck

3 jaw self-centering chuck

3 jaw self-centering chuck with inside and outside jaws and key

Measurements:
overall: 80 mm x 375 mm x 250 mm,
Object Number:
1983-777/4
type:
chuck
4 jaw independent chuck and key

4 jaw independent chuck and key

4 jaw independent chuck and key

Measurements:
overall: 60 mm x 355 mm x 250 mm,
Object Number:
1983-777/5
type:
chuck
Jacobs drill chuck and key

Jacobs drill chuck and key

Jacobs drill chuck and key

Measurements:
overall: 50 mm x 250 mm x 150 mm,
Object Number:
1983-777/6
type:
chuck
Small drill chuck (plain type)

Small drill chuck (plain type)

Small drill chuck (plain type)

Measurements:
overall: 145 mm x 38 mm x 38 mm,
Object Number:
1983-777/7
type:
chuck
Set of change wheels as follows : 2 of 20 teeth & 1 each of the following : 25

Set of change wheels as follows : 2 of 20 teeth & 1 each of the following : 25

Set of change wheels as follows : 2 of 20 teeth & 1 each of the following : 25, 30, 35, 38, 40, 45, 50, 55, 60, 65, 70, 75 [viz 14 plain wheels]; a pair of 56 & 21 teeth (lacks 8 teeth) & 1 collar

Measurements:
overall: 50 mm x 290 mm x 200 mm,
Object Number:
1983-777/8
type:
wheel
No. 2 to No. 1 Morse taper adaptor and drift

No. 2 to No. 1 Morse taper adaptor and drift

No. 2 to No. 1 Morse taper adaptor and drift, a spanner and a driver

Measurements:
overall: 18 mm x 250 mm x 150 mm,
Object Number:
1983-777/9
type:
morse taper adaptor and spanner
15 Myford turning tools

15 Myford turning tools

A set of 15 Myford turning tools (much ground-down) and levelling shoe

Measurements:
overall: 20 mm x 250 mm x 150 mm,
Object Number:
1983-777/10
type:
tools