Control gear as follows: rod with handle lever and slotted lever bound by grub screws; rod with bracket bearing and collar; rod with lever with pin and knuckle piece bound by grub screws; rod with plain hand lever bound by grub screws; square bar with striking pins; flat bar with clip with striking pins; crooked bar on fulcrum pin with striking fork and another bar jointed to its lever with handle and joint knuckle at ends and a bolt and nut; straight bar with fulcrum pin and striking forks with another bar and beyond it a lever with bars jointed to it; lever with boss and pin and a rod jointed to the pin. A ceiling bracket with bellcrank and wire ropes attached to handles with rod & sliding weight. Note: Several parts of other machines were found with these objects and it is not certain that all the above belong (MTW 22.1.93)

Small parts as follows : 2 brackets fitting to 1954-639/9; bracket fitting to 1954-639/10; 3 weights; a length of trace chain & 3 linked rods, wheel for trace chain on bracket fitting to /1 [belonging to fork drill spindlefeed]; centre for rotary table; 2 holders for slotting cutters; clamp for fitting these to slotting ram; lever with pin (goes on bracket with sector); 3 bracket or stay pieces forming bearings for rods; keeper plate; adjusting winch (seems not to fit squares of rotary table); footstep bearing from /9; 4 bolts & nuts & another bolt & nonmatching nut; 22 drills, counterbores and rose bits; a sheet-metal guard. Note : some of these may not belong to this machine