"Larry" cow hair mortar mixer

Made:
Middlesex
"Larry" cow hair mortar mixer

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

License this image for commercial use at Science and Society Picture Library

License

Science Museum Group
© The Board of Trustees of the Science Museum

"Larry" cow hair mortar mixer

Details

Category:
Building Construction
Object Number:
1977-412
Measurements:
L=2130 mm
W=270 mm
D=270 mm
type:
mortar mixer
credit:
Bierton, A.C.

Related Objects

Model of Westminster Hall roof joint

Model of Westminster Hall roof joint

Six inch trussed partition, scale model;component
Model, of Shouldered Stub Mortice and Tenon carpentry joint, joining two beech-wood blocks: stamped with ‘59’, by Polytechnisches Arbeits-Institut J. Schröder Atkiens-Gesselleschaft, Darmstadt, Hesse, Germany, 1868

Model, of Shouldered Stub Mortice and Tenon carpentry joint
Model, of Half-Lap Scarf carpentry joint, with round peg fitted, joining two beech-wood blocks: stamped with ‘3’, by Polytechnisches Arbeits-Institut J. Schröder Atkiens-Gesselleschaft, Darmstadt, Hesse, Germany, 1868

Model, of Half-Lap Scarf carpentry joint
Model, of Wedged Through Mortice and Tenon carpentry joint, with mortice aperture cut and open for Wedge (not present), joining two beech-wood blocks: stamped with ‘54’, by Polytechnisches Arbeits-Institut J. Schröder Atkiens-Gesselleschaft, Darmstadt, Hesse, Germany, 1868. This was constructed to fit (1868-31/22) Model, of beech-wood Wedge, with rounded ends, for Wedged Through Mortice and Tenon carpentry joint, by Polytechnisches Arbeits-Institut J. Schröder Atkiens-Gesselleschaft, Darmstadt, Hesse, Germany, 1868.

Model, of Wedged Through Mortice and Tenon carpentry joint