1 3/8" bolt with rod attached

Items found with Nasmyth steam hammer but not identified

Barrel (broken short)

Countershaft with iron pulley and wooden drum and pair of bearings and ceiling hangers

1860

Pair of wall-mounting shaft bearings to suit 1 1/2" shaft

1840

Shaft with fast & loose pulleys

Pair of fast & loose wheels

18 circular slot-weights; 2 weighted hangers & broken hook from a third

Iron bed with 2 sliding punches

Iron column with 2 perforated lugs at the top

Cast iron fitting with forked top

Iron wheel running on a pin on the end of an iron arm

Two heavy wooden (lignum vitae ?) rollers on iron

Bronze Manifold with pressure gauge (0-60 p.s.i.)

A pair of bronze drain or indicator cocks

Curved cover of wooden battens

A plywood board

Metal bracket

Steel rod 30" x 5/8" diameter with cast fitting clamped by a thumb screw

Steel shaft 56" long

2 wire tension-springs

An iron bar about 19 " x 1 3/4" x 1/4" with swellings for 2 holes about 2 1/8" diameter at 10" centres drifted

A quantity of machine parts found in Hayes bay 1 near to 1993-614; includes ratchet fittings

Two wooden blocks each with a wooden pulley sheave let in

Pair of copper syphon-pipes to pressure gauges

An iron bar with 4 elbows

2 idle spur wheels

3 draw-in shaft bushes (for rolling bearings etc)

2 brazed-up pipe elbows (breathers ?) with flange

2 cast iron drip pans for shaft hangers

Two heavy cast-iron stools

2 hard rubber blocks

Fittings from the brush gear of a large generator

3 1/2 wooden mortice teeth from millwork; one from a bevel wheel

12 half-bearings to fit shaft 2 1/8" diameter

A wrought-iron mill damsel; a flat iron bar with a row of cross holes and a journal ends

Cast iron uptake (?) pipe with square flanges

Lever with fork end for clutch or shifting gear