Components of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. A rectangular box with a metal element protuding from one side, an old label is on one side with Q 5263/A written on it and five screw holes on the back. Possible heater
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Metal component with five holes in the central element, one large, two medium and two small. On one side there is a channel cut and on the other side a smaller chanel with an arrow drawn on it. Possible Arc block
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Two interlocking components, with lots of holes drilled in. One component has four rows on holes organised into two sections, containing 19 holes in each. And there are three other sections of holes, two of six and one of ten. There is a large gap cut in and two small slits cut in the protruding section at one end. The elements are bolted together with one bolt in the middle. Possible Earth electrode.
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Two interlocking components, with lots of holes drilled in. One component has four rows on holes organised into two sections, containing 19 holes in each. And there are three other sections of holes, two of six and one of ten. There is a large gap cut in. The elements are bolted together with five bolts. Possible Earth electrode
Components of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. There is a box, two strips with holes drilled in, five U-shaped metal bits, one small metal bit with a hole cut in the middle and two thicker metal elements with holes drilled in. Possibly Tantalum filaments / source tray / used filaments / collimators / gas baffle / water cooled filament leads
Components of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Multiple components with holes and slits cut in them. One has a corroded brass slit. There are three parts with screws at each end. Possibly Arc slits
Components of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Two components with piping attached to a panel, these have screw holes on them.
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. A box like component with an opening on one side. Possibly Hi-temp. arc block
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. A plate with five slits in it with four larger holes and a single screw hole on one side.
Five components of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Two chipboard elements, and three other parts. The other three elements snake back on themselves and these are of a variety of sizes.
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. A t-shaped component with a hole cut in the top section, at the base there are two small slits at the bottom. Possibly Negative electrode
Three components of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Two elements are rectangular with a hole cut near the bottom, one is large and one is small, then there is a step and a small ramp down. Then there is an additional rectangular piece with a hole cut in the middle.
One component of ion source for Hermes electromagnetic separator, unsigned, British, 1976-1982. Metalic box, welded together at the ends and along the side, there is a screw protruding from the edge, and a tube protruding from the top, this has a nut attached. It is attached to a rectangular element on the bottom. Possibly s.s. source pot.
