Sectioned model (Scale 1:24) of Smock windmill from Cranbrook, Kent, c.1840.

PART OF:
Model, of Cranbrook Windmill, Kent, 1840
Made:
1835-1845 in Cranbrook

Main part of model, scale 1:24, of the smock windmill at Cranbrook, Kent, as it appeared in the mid 19th century, sectioned

Details

Category:
Motive Power
Object Number:
1929-1008/1
Measurements:
: 56.2992 x 37.0079 x 35.4331 in.
1430 x 940 x 900 mm
type:
windmills

Related Objects

Model steam engine
Oil tank and can.

Oil tank and can
1 of 4 demonstration models of engines. Model of steam engine single cylinder with valves sectioned hand turned crank with single eccentric to work the valve., scales on cylinder, slide valve and crank show points of cut off. Made by Cussons Limited, The Technical Works, Broughton, Manchester.

Demonstration model of a single cylinder engine, sectioned
1 of 4 demonstration models of engines. Model of Horizontal Gas Engine, Four stroke engine, sectioned with three poppet valves, gas in let and exhaust. The valves should be driven from a crankshaft at the back which is turned by screw gears from the crankshaft.

Demonstration model of valve mechanism of a four stroke gas engine
boiler

boiler
Single cylinder slide valve, horizontal steam engine with trunk guides. Single eccentric, 16inch flywheel, 3 inch bore by 6 inch stroke, with flickering govenor. Made in 1956 for driving the economisers at Bridge Mills, Hadfield. Manufactured by E Green and Son Ltd, Wakefield/Manchester.

horizontal steam engine