Whitworth Planing Machine

Made:
circa 1842 in Manchester
maker:
Joseph Whitworth and Company
Planing machine, made by Joseph Whitworth & Co Planing machine, made by Joseph Whitworth & Co

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Creative Commons LicenseThis image is released under a CC BY-NC-SA 4.0 Licence

Buy this image as a print 

Buy

License this image for commercial use at Science and Society Picture Library

License

Planing machine, made by Joseph Whitworth & Co
Science Museum Group Collection
© The Board of Trustees of the Science Museum

Planing machine, made by Joseph Whitworth & Co
Science Museum Group Collection
© The Board of Trustees of the Science Museum

Planing machine, made by Joseph Whitworth & Co. of Manchester, 1842. Belt drive, three pullies, one loos in the middle, to drive the lathe in either direction. Table worked by the worm screw and nut. Parts of the automatic cross feed to the tool holder are missing, as is the original tool holder which probably was the reversing type. This machine was originally in the LNWR Crewe works, reputedly used for making horn blocks for axles. Presented by A Bebbington & Son, Culland Street Works, Crewe.

The early planing machines made by Joseph Whitworth & Co. are different to those made by other manufacturers. Whitworth wanted to build a planing machine that cut the workpiece on both the forward and back strokes. He incorporated a rotating tool-box that reversed the position of the tool at the end of each stroke. This machine dates from 1842, and it is believed that its original tool-holder was the reversing type, although it is now missing. Three belt-driven pulleys drive the table, which can move in either direction to pass the workpiece under the cutting tool. Whitworth’s reversing mechanism was not widely adopted. Its complicated construction may have made it unreliable, and not sturdy enough for heavy engineering. This machine was originally in the London & North-Western Railway (L.N.W.R.) works at Crewe, where it was probably used to make horn blocks for axles.

Details

Category:
Hand and Machine Tools
Object Number:
Y1966.9
Materials:
cast iron and metal (unknown)
Measurements:
1880 mm x 1140 mm x 1510 mm, 888.5 kg
type:
planing machine
credit:
Gift of A Bebbington & Sons

Parts

machine parts

machine parts

One of five planing machine parts from Whitworth planing machine; possibly a catchplate.

Manufactured by by Joseph Whitworth & Co. of Manchester, 1842

Materials:
metal (unknown)
Object Number:
Y1966.9.1
type:
machine parts
Image ©
The Board of Trustees of the Science Musuem
machine parts

machine parts

One of five planing machine parts from Whitworth planing machine; a lever.

Manufactured by by Joseph Whitworth & Co. of Manchester, 1842

Materials:
metal (unknown)
Object Number:
Y1966.9.2
type:
machine parts
Image ©
The Board of Trustees of the Science Musuem
machine parts

machine parts

One of five planing machine parts from Whitworth planing machine; a pin or bolt.

Manufactured by by Joseph Whitworth & Co. of Manchester, 1842

Materials:
metal (unknown)
Object Number:
Y1966.9.3
type:
machine parts
Image ©
The Board of Trustees of the Science Musuem
machine parts

machine parts

One of five planing machine parts from Whitworth planing machine; a pin or bolt threaded through a small catchplate.

Manufactured by by Joseph Whitworth & Co. of Manchester, 1842

Materials:
metal (unknown)
Object Number:
Y1966.9.4
type:
machine parts
Image ©
The Board of Trustees of the Science Musuem
machine parts

machine parts

One of five planing machine parts from Whitworth planing machine; possibly a catchplate.

Manufactured by by Joseph Whitworth & Co. of Manchester, 1842

Materials:
metal (unknown)
Object Number:
Y1966.9.5
type:
machine parts
Image ©
The Board of Trustees of the Science Musuem