RCA Radiotron for 'Colortel' mechanical colour adaptor, to fit onto the front of the monochrome television set to convert NTSC-compatible monchrome set to colour using a field sequential disc. Made by Color Converter Inc. c. 1955. Part of the Donald Fleming Collection of North American television receivers. Accompanying converter chassis is missing.
Col-R-Tel colour convertor wheel made by Color Converter Incorporated, Indiana, United States, c.1950.
In October, 1950 the United States formally adopted the CBS system as their standard for colour television. The CBS field sequential colour system consisted of a rotating colour wheel of red, blue, and green filter segments in front of a monochrome camera, feeding a black and white television receiver viewed through a second rotating colour wheel (a system first demonstrated by Baird in 1928). Unfortunately the pictures were very flickery and so the frame rate (number of pictures per second) was increased to compensate. Instead of the usual American standard of 525 lines, this system ran at 405 lines. This incompatibility of the CBS system with existing black and white sets contributed to the United States' decision to drop the CBS system in favour of a promised NTSC-compatible colour system.
A few years later, in 1955, the field sequential colour idea was re-tried by Color Converter Inc. of Fort Wayne, Indiana. Their adaptor could be fitted on the front of a standard monochrome television set, (10" or 12" screen) to convert it to a colour picture. A special electronic adaptor chassis was attached at the rear of the set which converted NTSC-compatible colour signals then being transmitted back to a field-sequential type signal.