Model of Henry Maudslay's screw-cutting lathe
- maker:
- Henry Maudslay
This image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
LicenseThis image is released under a CC BY-NC-SA 4.0
Licence
Buy this image as a print
BuyLicense this image for commercial use at Science and Society Picture Library
License
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Science Museum Group
© The Board of Trustees of the Science Museum
Model of screw-cutting lathe, by Henry Maudslay, England, 1800-1820
Henry Maudslay pioneered the development of the screw-cutting lathe and improved machine tools built wholly of metal. He was accustomed to make models to illustrate and develop his ideas, and this one was preserved within the company he founded. It represents quite an advanced machine, specifically designed for making large screws. The screw being cut was turned directly by a labourer at the capstan wheel. The gears transmitted motion to a lead-screw that drew along the sliding saddle carrying the cutting tool. The machinist used the micrometer handwheel on the saddle to regulate the depth of the cut and to withdraw the tool as the machine was reversed, ready for another pass. The full-size lathe, perhaps intended to be about 2 or 3 metres long, would have been built of iron.
Details
- Category:
- Hand and Machine Tools
- Object Number:
- 1900-19/1
- Materials:
- iron, steel (metal) and brass (copper, zinc alloy)
- Measurements:
-
overall: 255 mm x 230 mm x 355 mm, 2 kg
- type:
- lathe - machine and model - representation
- credit:
- W. H. Maudslay
