0.4 inch composition punches for Figures (typeface series number: F470) in font sizes 14 and 24. This was designed to match Italic 0-9 lining figures for Baskerville series 169; Figures (typeface series number: F863) in font sizes 14; and Figures (typeface series number: F839) in font sizes 18 and 16. This was designed to match Bold 0-9 lining figures for Bembo Bold series 428. In an original wooden box. Manufactured by Monotype Corporation.

A Monotype punch is an engraved piece of hardened steel with a reverse-reading type character (letter, numeral or ornament) in relief. They were made by tracing patterns on a vertical pantograph machine. After cutting, the face of the punch was ground to the correct measurements denoted on the relevant chart for the typeface and size. Punches were made in standard sizes: 0.2in (0.51cm) x 0.2in, 0.4in (1.02cm) x 0.4in, 1in (2.54cm) x 1in, and 1in x 1.35in (3.43cm). If a Monotype punch became damaged it could be replaced, identically, using the pattern.

Patterns and punches were the artefacts that Monotype created and preserved to be able to make matrices on demand for their customers. The punch was stamped into a piece of phosphor bronze that made a matrix from which type could be cast. Eighty-two successive operations, including inspections through microscopes, were required to produce every perfect Monotype composition matrix. Patterns, punches and matrices were very valuable to the company and were kept in strong rooms at the Monotype factory in Surrey.

The Monotype Corporation produced metal matrices as well as machines that composed and cast type. The user of a Monotype machine could cast as much fresh type as they needed from a set of matrices. Composition matrices were made from a remarkable collection of typefaces designed there between 1900 and 1995. It included historical revivals such as Plantin, traditional typefounders’ designs such as Goudy Old Style and original Monotype designs such as Albertus.