Search our collection

Technical Memorandum relating to a trial at R.P.E. Westcott

Technical note entitled 'Determination of coolant ullage volume for the T.P.2 I.P.N. gas generator'

Report entitled 'Data for aeroelastic clearance of SF rounds'

Technical Memorandum entitled 'Development Cost Programme of Shuttered Boost Ignition Scheme for Mark 2 Seaslug'

Test instruction sheet entitled 'Torsion Tests on A Seaslug Control Blade, Using High Rates of Loading and Heating'

Report entitled 'TP2 gas generator explosion hazard trials'

Test instruction sheet entitled 'Tests to Derive a Flexibility Matrix for the S.F. Control Blade D9496 Fitted with the new mass balance'

Technica note entitled 'Technical appraisal of the three suggested schemes for MK2 Deerhound guidance compartment strength clearance'

Technical Memorandum entitled 'Seaslug Missile MK.1 Static Firing Trials'

Report entitled 'Advance Information for Trial no S208'

Technical note entitled 'Cost of Seaslug Mk.2 Integral Wing'

Test Instruction sheet entitled 'Project 502/Mk 2: Effect of Estimated Flight Temperatures on Local Stiffness of Mk 2 Seaslug Control Blade'

Technical note entitled 'Investigation into the effects and consequences of fitting ballast to boost tubes'

Specification entitled 'Setting-Up Instructions for A.W.A. Test Sequence Unit (M.T.E.)'

Technical Memorandum entitled 'Test MC.13 Dynamic Tests on an Integral Wing'

Technical Memorandum entitled 'Acceptance test on capacitor block assembly'

Technical Memorandum relating to a trial at R.P.E. Westcott

Report entitled 'Seaslug static margin(boost missile)'

Specification entitled 'For the Production Testing of Test Unit Operating and Monitoring 9CA/116'

Report entitled 'Advance Information Trial No S2C11 RAE Trial No X.3272/1'

Report entitled 'Strength and stiffness tests on the integral wing at elevated temperatures'

Specification entitled 'Setting-Up Procedure & Test Specification for the S.R.D.E., Broadband Telemetry Monitor'

Technical note entitled 'Changes in resonance frequency of a Mk2 control blade when subjected to simulated kinetic heating'

Report entitled 'Proposed New Fin Locks'

Specification entitled 'Instructions for Removing a Contaminated T.P.2B Gas Generator'

Test Instruction sheet entitled 'Project 502/Mk 2: Flexural Stiffness and Strenght Test on Rear Body E.5014'

Folder entitled 'Seaslug Mk.2 Control Blade Divergence Study'

Technical Memorandum entitled 'MK.2 Boost Flowering Tests'

Technical note entitled 'A comparison of three schemes for increasing boost phase stability'

Report entitled 'Flight plans for S2a missiles to investigate boost phase stability'

Technical Memorandum entitled 'Dynamic tests on missile S2A1/1'

Specification entitled 'Electrical Testing of Separation Switch Pack'

Technical note entitled 'Bend strength of Seaslug Mk.2 guidance compartment, S2C3-18 inclusive'

Technical Note entitled 'Impact paints for MK.2 Seaslug'

Report entitled 'Telemetry in Mark 2 Acceptance Rounds'

Seaslug Mk.1 Missile Type Record Part 3: Electrical and Electronics

Seaslug Mk. 1 Missile Type Record Part 2: Mechanical and Structural Design Summary Load and Stress Analysis and Gas Generator Design - Volume 2 Sections 4 to 8'

Series of items relating to the handling trollies and support equipment for the Seaslug Missile

Series of memos relating to the weight, centre of gravity and other calculations about the Seaslug Missile

Series of items relating to flutter tests on Seaslug missiles

Seaslug Mk.1 Missile Type Record'

Technical Note entitled 'Investigation of Temperatures on the Wing Skins of SA77'

Specification entitled 'Instructions for Check Firing the TP2C Gas Generator'

Specification entitled 'Leakage Testing of I.R.G.O.B. Gas Supply System E.5723'

Technical Note entitled 'Variable Gas Demand Unit Tests'

Folder containing technical notes entitled 'Storage tests on a TPIA gas generator lubricated with Emralon' and 'Storage Tests on Dry Lubricated Cylinders'

Report entitled 'Mk 2 Seaslug integral wing (D8184)'

Technical Memorandum entitled '"Limited Approval" Tests on the Cartridge Igniter for the T.P.2A Gas Generator to be Fitted in the Mk. 2 Seaslug Missile'

Technical Memorandum entitled 'Design Study for a Candling Flame Extinguisher Unit for the Deerhound Motor in Seaslug Mk II'

Technical Memorandum entitled 'Notes concerning the static firing and bonking test of a Seaslug dart fitted with a thin wall Deerhound sustainer motor'