Spindle machining centre

Made:
Milwaukee, Wisconsin, United States and Milwaukee county

Milwaukee matic numerically controlled horizontal spindle machining centre.

Details

Category:
Hand and Machine Tools
Object Number:
1980-1646
type:
spindle machine
credit:
Kearney and Trecker Marwin Ltd.

Parts

Upright, horizontal Spindle and Tool Magazine for Milwaukee Matic Horizontal Spindle Machining Centre

Upright, horizontal Spindle and Tool Magazine for Milwaukee Matic Horizontal Spindle Machining Centre

Main body of machining centre including the upright, horizontal spindle and tool magazine, for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre. Serial number: 3 – 8740.

Measurements:
overall: 2320 mm x 1980 mm x 2160 mm,
Object Number:
1980-1646/1
type:
spindle and magazine
Relay racks and switch racks

Relay racks and switch racks

5 relay racks and 4 switch racks for the cross bar switch for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 400 mm x 1220 mm x 1010 mm,
Object Number:
1980-1646/2
type:
switch
Maintenance Manual for centre

Maintenance Manual for centre

Maintenance Manual for centre, Processing Manual, Tool Setting Manual, Tool Holder Manual, Machining Centre Sales Catalogue and Full Product Line Catalogue. Approx 360 drawings concerning electrics & electronics and information sheets.

Object Number:
1980-1646/3
type:
manuals
Machine control unit for Milwaukee Matic Horizontal Spindle Machining Centre

Machine control unit for Milwaukee Matic Horizontal Spindle Machining Centre

Machine control unit produced by General Electric Company, for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 2500 mm x 1950 mm x 1130 mm,
Object Number:
1980-1646/4
type:
cabinet
Two pallet shuttles for Milwaukee Matic Horizontal Spindle Machining Centre

Two pallet shuttles for Milwaukee Matic Horizontal Spindle Machining Centre

Two pallet shuttles for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall (left hand shuttle) 1 OF 2: 1210 mm x 400 mm x 300 mm,
overall (right hand shuttle) 2 OF 2: 1210 mm x 400 mm x 300 mm,
Object Number:
1980-1646/5
type:
base
Pioneer Pump for Milwaukee Matic Horizontal Spindle Machining Centre

Pioneer Pump for Milwaukee Matic Horizontal Spindle Machining Centre

Pioneer Pump produced by Howell Electric Motors Co., for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 650 mm x 360 mm x 330 mm,
Object Number:
1980-1646/6
type:
pump
Support beams and hydraulic pipework for pallet shuttles, and a storage magazine cover for the Milwaukee-Matic Horizontal Spindle Machining Centre

Support beams and hydraulic pipework for pallet shuttles, and a storage magazine cover for the Milwaukee-Matic Horizontal Spindle Machining Centre

Support beams and hydraulic pipework for the pallet shuttles, and cover for the tool storage megazine for the Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall 3 OF 3: 450 mm,
overall 1 OF 3: 860 mm x 1150 mm x 470 mm,
overall 2 OF 3: 830 mm x 130 mm x 220 mm,
Object Number:
1980-1646/7
type:
pipes (conduits)
Upright cover for Milwaukee Matic Horizontal Spindle Machining Centre

Upright cover for Milwaukee Matic Horizontal Spindle Machining Centre

Upright cover for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 800 mm x 960 mm x 680 mm,
Object Number:
1980-1646/8
type:
cover
Bed for Milwaukee Matic Horizontal Spindle Machining Centre

Bed for Milwaukee Matic Horizontal Spindle Machining Centre

Bed for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 960 mm x 2900 mm x 1300 mm,
Object Number:
1980-1646/9
type:
Index Table for Milwaukee Matic Horizontal Spindle Machining Centre

Index Table for Milwaukee Matic Horizontal Spindle Machining Centre

Index table for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 1200 mm x 1100 mm x 1100 mm,
Object Number:
1980-1646/10
type:
table
Operator's control console and tape readers, panelling, and square pipework for Milwaukee Matic Horizontal Spindle Machining Centre

Operator's control console and tape readers, panelling, and square pipework for Milwaukee Matic Horizontal Spindle Machining Centre

Operator's control console and tape readers, panelling, and square pipework for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall (1 OF 3): 1350 mm x 770 mm x 600 mm,
overall (3 OF 3): 500 mm x 330 mm x 200 mm,
overall (2 OF 3): 600 mm x 1090 mm x 200 mm,
Object Number:
1980-1646/11
type:
tape reader
Vertical hydraulic pipework and reservoir for Milwaukee Matic Horizontal Spindle Machining Centre

Vertical hydraulic pipework and reservoir for Milwaukee Matic Horizontal Spindle Machining Centre

Vertical hydraulic pipework and reservoir for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 1320 mm x 2710 mm x 1000 mm,
Object Number:
1980-1646/12
type:
tubes and pipe
Panelling and Pipework for Milwaukee Matic Horizontal Spindle Machining Centre

Panelling and Pipework for Milwaukee Matic Horizontal Spindle Machining Centre

Panelling and pipework for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre. Consisting of seven sections of panelling and multiple sections of pipework.

Measurements:
overall: 900 mm x 1125 mm x 1280 mm,
Object Number:
1980-1646/13
type:
pipe and panelling
Three work pallets, 1A Lathe apron, cover for y-axis motor, square piping and panelling for Milwaukee Matic Horizontal Spindle Machining Centre

Three work pallets, 1A Lathe apron, cover for y-axis motor, square piping and panelling for Milwaukee Matic Horizontal Spindle Machining Centre

Three work pallets, 1A lathe apron, cylindrical cover for y-axis motor, square piping, and panelling for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre. The cylindrical cover for the y-axis motor was placed on the motor on top of the upright, alongside the upright cover.

Measurements:
Cylindrical cover: 200 mm x 290 mm x 290 mm,
Work pallet each x3: 170 mm x 470 mm x 460 mm,
Lathe apron: 230 mm x 330 mm x 460 mm,
Square piping: 200 mm x 460 mm x 220 mm,
Panelling each x2: 760 mm x 1140 mm x 250 mm,
Object Number:
1980-1646/14
type:
panelling , blocks and cover - closure
10” Dividing Head Spindle Block for Milwaukee Matic Horizontal Spindle Machining Centre

10” Dividing Head Spindle Block for Milwaukee Matic Horizontal Spindle Machining Centre

10” dividing head spindle block for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 250 mm x 420 mm x 220 mm,
Object Number:
1980-1646/15
type:
spindle block
12” Dividing Head Spindle Block for Milwaukee Matic Horizontal Spindle Machining Centre

12” Dividing Head Spindle Block for Milwaukee Matic Horizontal Spindle Machining Centre

12” dividing head spindle block for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 330 mm x 450 mm x 245 mm,
Object Number:
1980-1646/16
type:
spindle block
Box of panelling and components for Milwaukee Matic Horizontal Spindle Machining Centre

Box of panelling and components for Milwaukee Matic Horizontal Spindle Machining Centre

Metallic box containing panelling and components for Kearney and Trecker “Milwaukee Matic” horizontal spindle machining centre.

Measurements:
overall: 320 mm x 350 mm x 510 mm,
Object Number:
1980-1646/17
type:
box - container

Related Objects

Plaster replica of part of Diorite Inscription

Bench with 3 trestles

Eyelet selector chart in slide-rule format

Leg vice

Pillar Drill

Andrews 'Multiplex' Combined Vice and Workbench